Camx/Hanbanggaoke DVR password

oldsol · #1 02-19-2012, 03:45 PM

Hi all, I have just bought a Camx HB6008-sp-w-E2 4 channel DVR. It has a Hanbanggaoke motherboard SAV4016_MB.v2-060119
I need to know the default password for this unit. Cannot find any good reference material on the web
Any help would be appreciated.

oldsol · #2 02-19-2012, 04:37 PM

I found it by trial and error, so here it is in case someone else has the same problem.
12345678

A tough one!

Stream Ripper · #3 02-20-2012, 12:38 AM

Awesome, glad you got it working

brown530 · #4 03-04-2012, 09:27 PM

wo,cool

ekimih · #5 05-24-2012, 08:21 PM

Ok so I have a Hanbanggaoke and I did not get a remote with it and I am having a really hard time trying to figure out a remote that will work with it. I have searched every where. Can some one please help me to figure out what I can do. I turn on my DVR with the camera's pluged into the back, I turn it on and it says that it is loading and then the blocks pop up on the TV to were I can see the feed from my cam's. However the box is still locked because it tells you in the manual that you hvae to have the remote to unlock it for the first time and I have no idea how to find that remote. It is a Hanbanggaoke HB 7008. Please someone help me.

bennie1402 · #6 04-10-2014, 08:33 AM

Plug in a mouse and use that to type a password.

londoncctv · #7 05-16-2014, 04:47 AM

You are quite lucky.

Lost password on DVRs can end up very expensive!

hibak · #8 08-30-2014, 01:04 AM

the default password 888888

Ekimih · #9 09-23-2014, 07:13 PM

Please some one help me! I have the same problem where my DVR loads and then shows my feed on the tv however I can not access the DVR because it is locked. I do not have a remote control but I do have a mouse. I was not sure what you ment by plug it in and type a pin in he has it does not give me an option to type anything in, it just goes straight from turning on and loading to the live feed of my cameras. Please help