[mfmax]

I have noticed that after some program appears like CamgirlzREC people from MFC something changes quickly so that the program is no longer working. So it takes a bit of effort for Node Master Recorder.
(...)


It's an interesting fact. But as far as I know, the MFCRecorder (Asudem version) worked for more than one year, with no updates! (late 2015 - early 2017)

[supersonic80]

It's an interesting fact. But as far as I know, the MFCRecorder (Asudem version) worked for more than one year, with no updates! (late 2015 - early 2017)

And what is your point? Everything worked perfectly until MFC has changed the code on their servers.

[Hermiod]

Something seems to have been broken, lots of timeouts, cant even find the number of models.

[homah]

mfc does seem to be struggling at the moment

[Hermiod]

mfc does seem to be struggling at the moment

You think its their server? I tried to debug main.js, but its my first time looking at node.js code.

[poose22]

You think its their server? I tried to debug main.js, but its my first time looking at node.js code.

It's on MFC's end. The site doesn't load and they're working on it according to their twitter.

[mfmax]

For me, main and mobile MFC versions are currently working normally via browser (Chrome) on laptop.

UPDATE: I just checked the sites, I'm not using any recorder.

[OntintheGod]

strange

mfc is working on my tablet but not working at my laptop (chrome and mozzila checked

what about you guys


checked again, everything back to normal

i am afraid, when recorder is on, mfc do not load models, mfc do not work
when recorder if off , mfc is back again

do you guys have the same ?

[seahorseRoar]

And what is your point? Everything worked perfectly until MFC has changed the code on their servers.

horacio claimed that anytime someone makes an easy to use mfc capper that mfc changes something in order to break it.

mfmax points out that isn't a valid claim because mfcrecorder worked for quite some time. Even after MFC started offering higher bitrates it continued to work, just without the higher quality bitrates for MONTHS before a mfc change finally killed it.

[mfmax]

horacio claimed that anytime someone makes an easy to use mfc capper that mfc changes something in order to break it.

mfmax points out that isn't a valid claim because mfcrecorder worked for quite some time. Even after MFC started offering higher bitrates it continued to work, just without the higher quality bitrates for MONTHS before a mfc change finally killed it.


Yes. That was my point. ;)

[Wacker66]

checked again, everything back to normal

i am afraid, when recorder is on, mfc do not load models, mfc do not work
when recorder if off , mfc is back again

do you guys have the same ?

Seems to be the same here, I had MFC open and was working fine on desktop then opened recorder, did a refresh a bit later and MFC won't load for me now. Turned recorder off and still won't load. Tried on my phone on my wifi and it won't work but if I disable wifi and go on data it loads in fine. They must be tracking our IP's that are connecting to there servers in an unusual way and blocking them.:confused:

Finally after about 20 minutes or so with recorder off I can load site on desktop.

[Nates]

Seems to be the same here, I had MFC open and was working fine on desktop then opened recorder, did a refresh a bit later and MFC won't load for me now. Turned recorder off and still won't load. Tried on my phone on my wifi and it won't work but if I disable wifi and go on data it loads in fine. They must be tracking our IP's that are connecting to there servers in an unusual way and blocking them.:confused:

Finally after about 20 minutes or so with recorder off I can load site on desktop.

Don't worry, they don't track you, they expiriencing problems with xchat servers today. Some of them work, some not. Every time you connecting to mfc, you connecting to random server.

update: Seems they track how do you use xchat server and block your IP if you don't send some data. Need to implement mfc protocol.

[guestbuy]

Seems to be the same here, I had MFC open and was working fine on desktop then opened recorder, did a refresh a bit later and MFC won't load for me now. Turned recorder off and still won't load. Tried on my phone on my wifi and it won't work but if I disable wifi and go on data it loads in fine. They must be tracking our IP's that are connecting to there servers in an unusual way and blocking them.:confused:

Finally after about 20 minutes or so with recorder off I can load site on desktop.

Experiencing the same issue.

[paul.ymer]

Don't worry, they don't track you, they expiriencing problems with xchat servers today. Some of them work, some not. Every time you connecting to mfc, you connecting to random server.

It appears that they do actually block IP addresses

[horacio]

http://enclosejs.com/

I've just tried on my Mac and got .exe file, but I cannot test it, cause I'm a macOS user. Horacio, can you do it? Looks like it should be quite simple to create an standalone app.

@supersonic80, thanks for the idea ;) I made a little effort and made a MFC exe who worked only 10 minutes and 20 seconds, because Igor Klopov asked to pay for key for the release without time limitation.
I am found a similar program who is better for free ;) at https://github.com/zeit/pkg/
For MFC, CB and SU I made 3 variants (Windows, MacOS and Linux) ... I tried Windows, @Supersonic80 will try macOS and I hope someone will test Linux files.
Currently, the MFC files does not support browser (http://localhost:9080/) but I hope it will be fixed very soon.
I put my config.yml for MFC and put all models on 0. If you want some of these models to be recorded, you need to replace 0 with 1. Other config options must be also edited to yourself preferences.
Make sure you put your own Login/Password combinations for ChaturBate and ShowUp.
Leave the files in the same directories as in rar. Here I am thinking for C:\nm-mfc\, C:\nm-cb\ and C:\nm-su\
pkg.bat can be in C:\Windows. I recommend shortcut for pkg.bat put in the taskbar for easy launch.

Files for download is there: http://www.mediafire.com/file/97ktp9gt2k9392d/pkg.rar

[homah]

They must be tracking our IP's that are connecting to there servers in an unusual way and blocking them.:confused:

Finally after about 20 minutes or so with recorder off I can load site on desktop.

This does seem to be the case now. Looks like its back to the classic screen recording software until some genius finds a workaround.

[dm9452]

Save us, antihero!:(

[xxhieixx]

Save us, antihero!:(
and that's when antihero whispered back...
http://i.imgur.com/CCCf4rd.gif

[supersonic80]

Precompiled version for Windows users (x64) with timeout workaround.

https://mega.nz/#!0nYBALga!em6D1pbvFhEZ1-ohn_PQNf_CJzLLElDQ0WLB58gxwnw

Running
===========

Run mfc-node-win.exe
Wait till first "Done, will search for new models in 30 second(s)." message.
Open http://localhost:9080 in your browser

[FreeGrabApp]

Free XVideos Download (http://www.freegrabapp.com/free-xvideos-download)

Download and save xVideos videos ( xvideos.com ) to your PC, Ipod, Iphone, PSP, Mobile Phone with one-click. You don't need any players to play flash video just play it on the default media player classic. Save the downloaded video into various formats: .avi, .mpeg, .flv, .wmv. Download web videos to your PC, Ipod, PSP, Mobile.
​
Just run Free XVideos Download and start downloading! Simply paste the URL of a video into the program, and the file will be downloaded into the selected folder. No extra codecs or players needed. No need to use scripts for web browsers.
​

[c3po]

Working fine!
Thank you.

Is there a way to change the file format?


Precompiled version for Windows users (x64) with timeout workaround.

https://mega.nz/#!0nYBALga!em6D1pbvFhEZ1-ohn_PQNf_CJzLLElDQ0WLB58gxwnw

Running
===========

Run mfc-node-win.exe
Wait till first "Done, will search for new models in 30 second(s)." message.
Open http://localhost:9080 in your browser

[dahdiesel]

works like a charm.. great content!!

Precompiled version for Windows users (x64) with timeout workaround.

https://mega.nz/#!0nYBALga!em6D1pbvFhEZ1-ohn_PQNf_CJzLLElDQ0WLB58gxwnw

Running
===========

Run mfc-node-win.exe
Wait till first "Done, will search for new models in 30 second(s)." message.
Open http://localhost:9080 in your browser

[Wacker66]

Precompiled version for Windows users (x64) with timeout workaround.

https://mega.nz/#!0nYBALga!em6D1pbvFhEZ1-ohn_PQNf_CJzLLElDQ0WLB58gxwnw

Running
===========

Run mfc-node-win.exe
Wait till first "Done, will search for new models in 30 second(s)." message.
Open http://localhost:9080 in your browser


It works great except I can't play or convert the video file it creates. Can you change it to another more common format?

[supersonic80]

It works great except I can't play or convert the video file it creates. Can you change it to another more common format?

I returned it back to .ts, but I'm surprised people have problems with .f4v
https://mega.nz/#!prBiXSrQ!khIlaInnRoe9u4NT1UGf2EwnhsKMC2cRWULs-dJYGfw

[Wacker66]

I returned it back to .ts, but I'm surprised people have problems with .f4v
https://mega.nz/#!prBiXSrQ!khIlaInnRoe9u4NT1UGf2EwnhsKMC2cRWULs-dJYGfw

Thanks man much appreciated, VLC wouldn't do anything with .f4v on my windows 10 machine. With .ts I can easily convert it to .mp4 if I want to.

[Damianonymous]

@supersonic80, thanks for the idea ;) I made a little effort and made a MFC exe who worked only 10 minutes and 20 seconds, because Igor Klopov asked to pay for key for the release without time limitation.
I am found a similar program who is better for free ;) at https://github.com/zeit/pkg/
For MFC, CB and SU I made 3 variants (Windows, MacOS and Linux) ... I tried Windows, @Supersonic80 will try macOS and I hope someone will test Linux files.
Currently, the MFC files does not support browser (http://localhost:9080/) but I hope it will be fixed very soon.
I put my config.yml for MFC and put all models on 0. If you want some of these models to be recorded, you need to replace 0 with 1. Other config options must be also edited to yourself preferences.
Make sure you put your own Login/Password combinations for ChaturBate and ShowUp.
Leave the files in the same directories as in rar. Here I am thinking for C:\nm-mfc\, C:\nm-cb\ and C:\nm-su\
pkg.bat can be in C:\Windows. I recommend shortcut for pkg.bat put in the taskbar for easy launch.

Files for download is there: http://www.mediafire.com/file/97ktp9gt2k9392d/pkg.rar

It seems that this is a big step forward, an easy application available to a wider group of computer laity than the traditional version :) Will the problem be to duplicate the .TS format? The only thing that surprised me is your preference for working with files on your system drive C :p


Precompiled version for Windows users (x64) with timeout workaround.

https://mega.nz/#!0nYBALga!em6D1pbvFhEZ1-ohn_PQNf_CJzLLElDQ0WLB58gxwnw

Running
===========

Run mfc-node-win.exe
Wait till first "Done, will search for new models in 30 second(s)." message.
Open http://localhost:9080 in your browser


I am waiting for a 32 bit version, for testing on my ten year old laptop :D

[supersonic80]

I am waiting for a 32 bit version, for testing on my ten year old laptop :D

Suppose this should work
https://mega.nz/#!drBFkCyY!tXQlgchKIlZ3NoQgx5KNRMwW5fPCHN4cfZLYk2K VXTc

[Damianonymous]

It works great. With these bans on IP it's true, I've run the old versions of mfc-node-master and I had to wait:D I have not even noticed that the main version is already V2;)

[CristianoA]

Precompiled version for Windows users (x64) with timeout workaround.

https://mega.nz/#!0nYBALga!em6D1pbvFhEZ1-ohn_PQNf_CJzLLElDQ0WLB58gxwnw

Running
===========

Run mfc-node-win.exe
Wait till first "Done, will search for new models in 30 second(s)." message.
Open http://localhost:9080 in your browser


app works fine :) i guess to add models which aren't online i need to edit config manually add id and name correct ?

any chance to add feature to save models to separate folders ?

[supersonic80]

app works fine :) i guess to add models which aren't online i need to edit config manually add id and name correct ?

any chance to add feature to save models to separate folders ?

Include

http://localhost:9080/models/include?nm=modelname
http://localhost:9080/models/include?uid=12345678

Exclude

http://localhost:9080/models/exclude?nm=modelname
http://localhost:9080/models/exclude?uid=12345678

Delete

http://localhost:9080/models/delete?nm=modelname
http://localhost:9080/models/delete?uid=12345678

[Hermiod]

I think they changed something,started to get:
[2017-07-11_02-47-01] Start searching for new models
[2017-07-11_02-47-01] Server listening on: 0.0.0.0:9080
[2017-07-11_02-47-01] [ERROR] Error: Server responded with a non-101 status: 503
Response Headers Follow:
content-type: text/html
content-length: 369
date: Tue, 11 Jul 2017 05:47:01 GMT
server: lighttpd/1.4.33

[rx7sr4]

http://i.imgur.com/GvL9Zyc.jpg

[poose22]

MFC has been down for the last couple of hours. wait until it's back up and see what happens. Should work then.

[horacio]

MFC has been down for the last couple of hours. wait until it's back up and see what happens. Should work then.

I have not yet encountered such a bad situation with the MFC as in the picture. Here's what MFC looks like at the moment:

https://s20.postimg.org/ejurmourh/2336.jpg

Anyone who wants to try my new version of Mfc Node Recorder 2.0.0 can do download zip here:

https://codeload.github.com/horacio9a/mfc-node/zip/v2

[Damianonymous]

Trouble with MFC, Bongacams, do not know what tomorrow's Chaturbate update will bring ... heavy times for us :p

[Nemesis]

MFC is back and everything looks "normal"!
Mfc Node Recorder works fine for me, like before the down time!:)

[TMK]

Anyone who wants to try my new version of Mfc Node Recorder 2.0.0 can do download zip here:

https://codeload.github.com/horacio9a/mfc-node/zip/v2

Thank you horacio (and others in this thread) for all your amazing work. Can you confirm that your version avoids the possibility of an MFC IP ban? I'm a member of the site so it's quite important to me that I don't get banned :D

[homah]

Thank you horacio (and others in this thread) for all your amazing work. Can you confirm that your version avoids the possibility of an MFC IP ban? I'm a member of the site so it's quite important to me that I don't get banned :D

I wouldn't worry too much about that, so far bans only lasted 30 minutes, I let it happen a good few times in one day and I'm a premium member myself.

Also based on his screenshot, looks like his version is up to date with the one that doesn't ban you.

[Hermiod]

Seems like the site is down again, weirdly it worked for me for about 2 or 3 connections, then died.

[poose22]

I have not yet encountered such a bad situation with the MFC as in the picture. Here's what MFC looks like at the moment:

https://s20.postimg.org/ejurmourh/2336.jpg

Anyone who wants to try my new version of Mfc Node Recorder 2.0.0 can do download zip here:

https://codeload.github.com/horacio9a/mfc-node/zip/v2
I tried running this, but cannot seem to get it running. Keeps giving an error: Cannot find module 'MFCAuto'

I tried placing the files in a new directory, and I also tried placing it in the same directory as the old install. What's the proper way to get the new 2.0 version working? Thanks in advance for your work!

[supersonic80]

I tried running this, but cannot seem to get it running. Keeps giving an error: Cannot find module 'MFCAuto'

I tried placing the files in a new directory, and I also tried placing it in the same directory as the old install. What's the proper way to get the new 2.0 version working? Thanks in advance for your work!

You need to run

npm install

inside the folder with a script.

Or use some "precompiled" versions posted above.

[poose22]

You need to run

npm install

inside the folder with a script.

Or use some "precompiled" versions posted above.

I tried that as well, but get the error below (using node 8.1.3). I'm still pretty new to this node stuff and not sure what to do about this git binary. It's not mentioned in the readme as being a requirement.

==================
npm ERR! code ENOGIT
npm ERR! No git binary found in $PATH
npm ERR!
npm ERR! Failed using git.
npm ERR! Please check if you have git installed and in your PATH.
==================

[homah]

Looks like you need to install git

https://git-scm.com/book/en/v2/Getting-Started-Installing-Git

[poose22]

Thanks everyone. Had to install Git into the same directory as the new 2.0 version. Was able to then install it and got it running! :)

[CristianoA]

Precompiled version for Windows users (x64) with timeout workaround.

https://mega.nz/#!0nYBALga!em6D1pbvFhEZ1-ohn_PQNf_CJzLLElDQ0WLB58gxwnw

Running
===========

Run mfc-node-win.exe
Wait till first "Done, will search for new models in 30 second(s)." message.
Open http://localhost:9080 in your browser


big problem when i exit your app when streams captured they aren't playable at all :( and there is no way to fix them as well :(

[supersonic80]

big problem when i exit your app when streams captured they aren't playable at all :( and there is no way to fix them as well :(

What files do you get: .f4v or .ts?
If .f4v does not work for you there was a .ts version a couple message down, find it and use it.

The app starts an ffmpeg process for every model you want to record, then monitor these procesess.
If the model stops broadcasting, the app moves the model's file from capturing to complete directory.
You should be able to play files from complete directory without any problems (if you have compatible video player).

When you stop the app, you actually do not stop ffmpeg processes.
The files in capturing directory will be "locked", unless the model stop streaming and ffmpeg "releases" the file automatically or you kill all ffmpeg processes manually.

[wankxxx]

Did somebody mention a possible mac version of this? :)

[supersonic80]

Did somebody mention a possible mac version of this? :)

Try it https://mega.nz/#!VrZSAKZY!aJY7cOmbr5Bu7wEgAImLuri0LWBQLbEO_XL1xMs iac4

It does not start if I do double click on mfc-node file, however it starts fine if I launch it via Terminal.

[dichtailieugiare]

C?´ng ty Di??ch thu????t Master Service chuy??n nghiệp trong lÄ©nh vá»±c dịch thu????t tiá??ng Nga (http://dichthuatmaster.com/dich-tai-lieu/dich-tai-lieu-tieng-nga/) t?*i liệu x??y dá»±ng sang tiá??ng Việt v?* ng?°á»?c lá??i, Dịch c?´ng chứng tiá??ng Nga Quá?*n T??n Ph??, Dịch tiá??ng Anh Quá?*n 1

Master Service nhá?*n dịch t?*i liệu tiá??ng Nga chuy??n ng?*nh bao gồm:
Dịch t?*i liệu kinh tá?? tiá??ng Nga Dịch game tiá??ng Nga Dịch b??o c??o t?*i ch?*nh tiá??ng Nga Dịch t?*i liệu x??y dá»±ng tiá??ng Nga Dịch há»?p đồng tiá??ng Nga Dịch t?*i liệu dá?§u kh?* tiá??ng Nga Dịch phim tiá??ng Nga Dịch t?*i liệu y khoa tiá??ng Nga Dịch t?*i liệu ká»? thuá?*t tiá??ng Nga Dịch vÄ?n bá??n ph??p luá?*t tiá??ng Nga Dịch t?*i liệu marketing/PR tiá??ng Nga
Danh s??ch t?*i liệu c?? thá»? dịch c?´ng chứng tiá??ng Nga:
Há»™ khá?©u, Chứng minh th?°, Giá??y ph?©p l??i xe, Giá??y Ä‘Ä?ng k?? sá»? há»?u xe Giá??y khai sinh, Ch?°??ng nh????n Ä‘Ä?ng k?? ká??t h?´n, Giá??y chứng tá»*, Chứng nhá?*n Ä‘á»™c th??n Bá?±ng tiá»?u há»?c, Bá?±ng trung há»?c, Bá?±ng Ä‘á??i há»?c, Bá?±ng cao Ä‘á??ng, Bá?±ng trung cá??p chuy??n nghiệp, Bá?±ng nghá»?, Bá??ng Ä‘iá»?m, Há»?c bá??, Chứng nhá?*n kh??a há»?c, Ch?°??ng nh????n t?´??t nghi????p Sổ t?*i khoá??n, S?´?‰ Ä‘o?‰, S?´?‰ h?´?€ng, Quyá»?n sá»* dá»?ng Ä‘á??t, Sổ t?*i khoá??n ng??n ha?€ng, chứng thá»±c Ä‘Ä?ng k?? doanh nghiệp, Há»?p đồng lao Ä‘á»™ng, Xa??c nh????n l?°??ng, Hồ s?? xin visa du lịch, hồ s?? xin du há»?c, hồ s?? xin định c?° B??o c??o kiá»?m to??n, B??o c??o t?*i ch?*nh, Bá??ng c??n đối ká?? to??n, H??a Ä‘??n / Phiá??u thu chi Há»?p đồng kinh tá??, Brochure, Profile c?´ng ty, Ta?€i li????u Ä‘????u th???€u, Ta?€i li????u ky?? thu????t VÄ?n bá??n há»?p đồng, T?*i liệu doanh nghiệp, Ta?€i li????u Ä‘????u th???€u, Ta?€i li????u ky?? thu????t
Master Service c??n nhá?*n phi??n di??ch tiá??ng Nga (http://dichthuatmaster.com/phien-dich-hoi-thao/phien-dich-tieng-nga/) sang tiá??ng Việt. C??c dịch vá»? nh?°:
Th?´ng dịch há»™i thá??o, sá»± kiện, tour du lịch Phi??n dịch tá??i t??a, sá»? t?° ph??p Phi??n dịch cabin Phi??n dịch MC, Th?´ng dịch ch?°??ng tr?¬nh truyá»?n h?¬nh

Vá»›i kinh nghiệm tr??n 8 nÄ?m hoá??t Ä‘á»™ng trong ng?*nh, ch??ng t?´i bá??o Ä‘á??m qu?? kh??ch h?*ng sá?? nhá?*n Ä‘?°á»?c bá??n dịch chuá?©n x??c v?* cung cá??p cho qu?? kh??ch phi??n dịch vi??n chá??t l?°á»?ng, nÄ?ng lá»±c tr?¬nh Ä‘á»™ chuy??n m?´n cao vá»›i mức gi?? há»?p l?? nhá??t

Dịch thuá?*t Master Service – VÄ?n ph??ng Ä‘á??i diện tá??i Việt Nam
Ä?T: (+84) 6678 3414 – (+84) 6678 3015 – Hotline: (+84) 934 453 303
Website: www.dichthuatmaster.com
E-mail: contact@master-service.asia

[Hermiod]

Are you guys getting loads of timeouts? At this moment main site is not working for me. How do I know if my IP is banned? I saw someone saying that there was a version of the software that got people banned, what version was it?

[wankxxx]

Try it https://mega.nz/#!VrZSAKZY!aJY7cOmbr5Bu7wEgAImLuri0LWBQLbEO_XL1xMs iac4

It does not start if I do double click on mfc-node file, however it starts fine if I launch it via Terminal.

Well, it doesn't run for me even if I open with Terminal. I get an error:

MacBook-Pro:~ RED$ /Users/RED/Desktop/mfc-node-macos/mfc-node ; exit;
fs.js:641
return binding.open(pathModule._makeLong(path), stringToFlags(flags), mode);
^

Error: ENOENT: no such file or directory, open 'config.yml'
at Error (native)
at Object.fs.openSync (fs.js:641:18)
at Object.fs.openSync (pkg/prelude/bootstrap.js:435:32)
at Object.fs.readFileSync (fs.js:509:33)
at Object.fs.readFileSync (pkg/prelude/bootstrap.js:621:36)
at Object.<anonymous> (/snapshot/mfc-node/main.js:26:31)
at Module._compile (pkg/prelude/bootstrap.js:1151:22)
at Object.Module._extensions..js (module.js:579:10)
at Module.load (module.js:487:32)
at tryModuleLoad (module.js:446:12)
at Function.Module._load (module.js:438:3)
at Module.runMain (pkg/prelude/bootstrap.js:1214:12)
at run (bootstrap_node.js:432:7)
at startup (bootstrap_node.js:192:9)
at bootstrap_node.js:547:3
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.

[Process completed]

ug, I hate terminal :mad:
I need me some antihero :)

[Hermiod]

Error: ENOENT: no such file or directory, open 'config.yml'


Is the config.yml file in that folder?

[wankxxx]

Is the config.yml file in that folder?

yep, I extracted it all to a folder on my desktop. edited the config.yml file with the paths for the apture & complete. saved it. then right click mfc-node - open with Terminal

[korbatjov]

I have not yet encountered such a bad situation with the MFC as in the picture. Here's what MFC looks like at the moment:

https://s20.postimg.org/ejurmourh/2336.jpg

Anyone who wants to try my new version of Mfc Node Recorder 2.0.0 can do download zip here:

https://codeload.github.com/horacio9a/mfc-node/zip/v2

downloaded it and got it running but it just stops recording right after it starts.

[supersonic80]

downloaded it and got it running but it just stops recording right after it starts.

If you see something like "Model stopped streaming" then you probably have an issue with ffmpeg. Check that you have it and your OS knows where to find it.

[horacio]

downloaded it and got it running but it just stops recording right after it starts.

Check config.yml ... second line must be:

dateFormat: DDMMYYYY-HHmmss

... in my version. You can put ffmpeg.exe in directory where is all files, although it's enough to be somewhere in the path.

You can download last version from the same link:

https://codeload.github.com/horacio9a/mfc-node/zip/v2

... added filename for recorded files + file size and some other little changes in text.

https://raw.githubusercontent.com/horacio9a/mfc-node/v2/screenshot2.jpg

[korbatjov]

Check config.yml ... second line must be:

dateFormat: DDMMYYYY-HHmmss

... in my version. You can put ffmpeg.exe in directory where is all files, although it's enough to be somewhere in the path.

You can download last version from the same link:

https://codeload.github.com/horacio9a/mfc-node/zip/v2

... added filename for recorded files + file size and some other little changes in text.

https://raw.githubusercontent.com/horacio9a/mfc-node/v2/screenshot2.jpg

Yes i do have ffmpeg.exe in the same folder as the main.js and other files, still just gives me this in the console and then i get an messages when i close the console and the second line of the config.yml file is dateFormat: DDMMYYYY-HHmmss

[supersonic80]

Yes i do have ffmpeg.exe in the same folder as the main.js and other files, still just gives me this in the console and then i get an messages when i close the console and the second line of the config.yml file is dateFormat: DDMMYYYY-HHmmss

Open main.js
find and comment out these lines (193-194)

'-v',
'fatal',


should be something like this

// '-v',
// 'fatal',


start the script again. Then, either solve the problem by yourself based on new error messages from ffmpeg or send the new output to this forum.

[korbatjov]

Open main.js
find and comment out these lines (193-194)

'-v',
'fatal',


should be something like this

// '-v',
// 'fatal',


start the script again. Then, either solve the problem by yourself based on new error messages from ffmpeg or send the new output to this forum.

Okey so i did that and now i got this messages http://i.imgur.com/Ekf26ez.png

[horacio]

Yes i do have ffmpeg.exe in the same folder as the main.js and other files, still just gives me this in the console and then i get an messages when i close the console and the second line of the config.yml file is dateFormat: DDMMYYYY-HHmmss

To me this looks like the model 'SPLENDID__' was 'AWAY' or 'PRIVATE' at that moment. In principle, it makes no sense to try to record a model if its 'preview' image can not be obtained under column 'Menu' and 'Name' in your browser. Try to record some other models ;)

[korbatjov]

To me this looks like the model 'SPLENDID__' was 'AWAY' or 'PRIVATE' at that moment. In principle, it makes no sense to try to record a model if its 'preview' image can not be obtained under column 'Menu' and 'Name' in your browser. Try to record some other models ;)

I have tried it with alot of different models and even up to 4-5 at one time but its the same with all of them and im sure she wasn't away or in a private at the moment of this.

Here is a picture of it happening again when the model is online. http://i.imgur.com/XiIqLva.png

[horacio]

I have tried it with alot of different models and even up to 4-5 at one time but its the same with all of them and im sure she wasn't away or in a private at the moment of this.

Here is a picture of it happening again when the model is online. http://i.imgur.com/XiIqLva.png

It may be a date format problem, so try changing it to congfig.yml

dateFormat: YYYYMMDD-HHmmss

Also try with other captureDirectory:

captureDirectory: 'C:\Videos\MFC'
captureDirectory: 'C:\Videos\MFC\'
captureDirectory: 'C:\Videos\MFC\\'

[korbatjov]

It may be a date format problem, so try changing it to congfig.yml

dateFormat: YYYYMMDD-HHmmss

Also try with other captureDirectory:

captureDirectory: 'C:\Videos\MFC'
captureDirectory: 'C:\Videos\MFC\'
captureDirectory: 'C:\Videos\MFC\\'

Tried all that, even moved the whole folder with all the files to just c:\mfc-node-2, i really don't know what els to try, I have done everything thats in the readme file

[Hermiod]

Tried all that, even moved the whole folder with all the files to just c:\mfc-node-2, i really don't know what els to try, I have done everything thats in the readme file

I have the same issue as you do, cant get Horatios version to record stuff, keep getting the recording/stopped recording error.

The original and ZeChico work fine.

[supersonic80]

I have the same issue as you do, cant get Horatios version to record stuff, keep getting the recording/stopped recording error.

The original and ZeChico work fine.

I had this problem too when I was playing with the original script. I know for fact, the m3u8 file is empty that is why ffmpeg fails. But that time I thought this is "no mobile feed" case and I did not try to "dig dipper".

There are several possible explanations of this:
1) There are new servers without mobile streams (I guess in the past it was some check some thing like this camserv < 840 = "no mobile fee")
2) MFC changed the URL to mobile feed for some servers.

[horacio]

Tried all that, even moved the whole folder with all the files to just c:\mfc-node-2, i really don't know what els to try, I have done everything thats in the readme file

I've changed a line about ffmpeg recording so try a new version of main.js, maybe help.
Also README.md is little changed.
The link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

[korbatjov]

I've changed a line about ffmpeg recording so try a new version of main.js, maybe help.
Also README.md is little changed.
The link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

it works! thank you so much for the work you put in!

EDIT: okey so it worked for about an hour or something then i started to get some connection issus, don't know if this was mfc sided but i did get this error messages so i thought i would post it http://i.imgur.com/nOcsUhZ.png

[t0wer10]

I'm getting a throw error when I load node main.js from terminal. Did I set something up incorrectly?

[supersonic80]

I'm getting a throw error when I load node main.js from terminal. Did I set something up incorrectly?

It's hard to guess without knowing what error you got.

[t0wer10]

It's hard to guess without knowing what error you got.

When I try to launch Main.js
I get
Line: 41
Char: 20
Error: Syntax error
Code: 800A03RA
Source: Microsoft JScript compilation error

Do I need to install a different framework?

[supersonic80]

When I try to launch Main.js
I get
Line: 41
Char: 20
Error: Syntax error
Code: 800A03RA
Source: Microsoft JScript compilation error

Do I need to install a different framework?

Did you install nodejs?
Did you install Git?
Did you use npm install command?

Read README.md file for instructions or use precompiled version mentioned above.

[horacio]

When I try to launch Main.js
I get
Line: 41
Char: 20
Error: Syntax error
Code: 800A03RA
Source: Microsoft JScript compilation error

Do I need to install a different framework?

I've changed in main.js some lines about mkdir function so try a new version of main.js, maybe help.
Try put some new capture directory in config.yml for test.

The link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

[horacio]

it works! thank you so much for the work you put in!

EDIT: okey so it worked for about an hour or something then i started to get some connection issus, don't know if this was mfc sided but i did get this error messages so i thought i would post it http://i.imgur.com/nOcsUhZ.png

I'm glad it finally worked, but I see new problems are coming.
It looks weird to you;)
For example, I can not find files that make a errors for you like:

events.js: 160
util.js: 1018: 11
net.js: 568: 26

I found only (C:\-nm-mfc2\node_modules\bluebird\js\main\util.js) but that's not 'yours' it has only 321 lines!
Can you locate which file doing errors for you and write a full file path?

[korbatjov]

I'm glad it finally worked, but I see new problems are coming.
It looks weird to you;)
For example, I can not find files that make a errors for you like:

events.js: 160
util.js: 1018: 11
net.js: 568: 26

I found only (C:\-nm-mfc2\node_modules\bluebird\js\main\util.js) but that's not 'yours' it has only 321 lines!
Can you locate which file doing errors for you and write a full file path?

Again thank you for trying to help me!

I don't really understand what you are asking me here, but i searched for a util.js and found like 5-6 of them in different folders in the node_modules path, I do remember that i might not have Java installed/updated, do you think this might have something to do with it?

here are some paths to the util.js files:

mfc-node-2\node_modules\core-util-is\lib
mfc-node-2\node_modules\MFCAuto\lib
mfc-node-2\node_modules\argparse\lib
mfc-node-2\node_modules\combined-stream2\node_modules\bluebird\js\main
mfc-node-2\node_modules\bhttp\node_modules\bluebird\js\main
mfc-node-2\node_modules\stream-length\node_modules\bluebird\js\main
mfc-node-2\node_modules\bluebird\js\release
mfc-node-2\node_modules\form-data2\node_modules\bluebird\js\main

[mfmax]

First of all, I would like to thank everyone who is engaged and working on the development of mfc-node. Great job! ;)

I'm begining to use the precompiled version of the node and it works perfectly. Is it possible to edit the files name format (models) and create output folders separately? (useful to organize the recordings). Something that could be configured in the config.yml file, for example. Is there any way to do it?

[aand101]

I installed Node.js and when running npm install I get the message:

npm should be run outside of the node repl, in your normal shell. <Press Control-D to exit.>

Can someone explain me, step by step, how to proceed?

[xxhieixx]

ug, I hate terminal :mad:
I need me some antihero :)
Believe me, we are all wishing he would return.

https://media.giphy.com/media/ToMjGpz81S7usvTIM8w/giphy.gif

...I can't imagine you lot -actually enjoy- using node.:rolleyes:

[homah]

Node runs great once it's set up and you're familiar with the way it works. Only thing I would like to see separate folders for each model, but that's it.

I feel like if there is a problem with node, it gets sorted out quick.

[horacio]

Again thank you for trying to help me!

I don't really understand what you are asking me here, but i searched for a util.js and found like 5-6 of them in different folders in the node_modules path, I do remember that i might not have Java installed/updated, do you think this might have something to do with it?

here are some paths to the util.js files:

mfc-node-2\node_modules\core-util-is\lib
mfc-node-2\node_modules\MFCAuto\lib
mfc-node-2\node_modules\argparse\lib
mfc-node-2\node_modules\combined-stream2\node_modules\bluebird\js\main
mfc-node-2\node_modules\bhttp\node_modules\bluebird\js\main
mfc-node-2\node_modules\stream-length\node_modules\bluebird\js\main
mfc-node-2\node_modules\bluebird\js\release
mfc-node-2\node_modules\form-data2\node_modules\bluebird\js\main

For comparison of your 8 I have only 2 util.js:

C:\-nm-mfc2\node_modules\bluebird\js\main\util.js
C:\-nm-mfc2\node_modules\core-util-is\lib\util.js

You have a lot of surprises and I think it would be best to make a new directory where you will only put the files from my zip and make the installation according to the instructions from README.md
Otherwise I do not have files:

events.js
net.js

... which causes for you errors. I also think that files are an unbeatable surplus.

[poose22]

First of all, I would like to thank everyone who is engaged and working on the development of mfc-node. Great job! ;)

I'm begining to use the precompiled version of the node and it works perfectly. Is it possible to edit the files name format (models) and create output folders separately? (useful to organize the recordings). Something that could be configured in the config.yml file, for example. Is there any way to do it?

Node runs great once it's set up and you're familiar with the way it works. Only thing I would like to see separate folders for each model, but that's it.

I feel like if there is a problem with node, it gets sorted out quick.

I asked about this back on page 94. The response I got was that I should just manually move files to their own folders. Maybe one day this will be added as I would love folders for each model too.

[korbatjov]

For comparison of your 8 I have only 2 util.js:

C:\-nm-mfc2\node_modules\bluebird\js\main\util.js
C:\-nm-mfc2\node_modules\core-util-is\lib\util.js

You have a lot of surprises and I think it would be best to make a new directory where you will only put the files from my zip and make the installation according to the instructions from README.md
Otherwise I do not have files:

events.js
net.js

... which causes for you errors. I also think that files are an unbeatable surplus.

So i installed/updated java and since then it have been working, will update if anything els happens, and again thanks for all the help!

[aand101]

I installed Node.js and when running npm install I get the message:

npm should be run outside of the node repl, in your normal shell. <Press Control-D to exit.>

Can someone explain me, step by step, how to proceed?

nobody??? :(

[moooby]

nobody??? :(

It sounds like you are running node.

If your run the 'node' command in your shell it will run node's own environment. You can't call NPM from in here.

Type '.exit' and this will exit node and go back to your shell. Now you can run npm.

Once that's done, you have to run 'node main' to start the script.

[aand101]

It sounds like you are running node.

If your run the 'node' command in your shell it will run node's own environment. You can't call NPM from in here.

Type '.exit' and this will exit node and go back to your shell. Now you can run npm.

Once that's done, you have to run 'node main' to start the script.

I was able to install npm... now how do I start the main node?

[aand101]

When I try to launch Main.js
I get
Line: 41
Char: 20
Error: Syntax error
Code: 800A03RA
Source: Microsoft JScript compilation error

I get a similar message:

Windows Script Host
Line: 103
Char: 21
Error: Invalid character
Code: 800A03F6
Source: Microsoft JScript compilation error

[Damianonymous]

I was able to install npm... now how do I start the main node?

Open notepad. Enter the code given below and save it in the application folder as a .bat file (run.bat, runCapture.bat, etc.). Click on the script that will launch the node.

pushd %cd%

node main

[aand101]

Open notepad. Enter the code given below and save it in the application folder as a .bat file (run.bat, runCapture.bat, etc.). Click on the script that will launch the node.

pushd %cd%

node main

I did this, the command window opens and then closes suddenly. :(

[horacio]

I asked about this back on page 94. The response I got was that I should just manually move files to their own folders. Maybe one day this will be added as I would love folders for each model too.

That day was finally arrived;)
Each model is recorded in a separate folder now ;)
Download link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

[Hermiod]

That day was finally arrived;)
Each model is recorded in a separate folder now ;)
Download link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Thanks Horatio! Will try again your version (I hope it likes me this time)

[rockingharder]

That day was finally arrived;)
Each model is recorded in a separate folder now ;)
Download link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

How do you install it? Sorry i couldnt find the answer

[supersonic80]

How do you install it? Sorry i couldnt find the answer

Read README.md file or use "precompiled" versions of updated original script

mfc-node-win32.zip (https://mega.nz/#!UuYXwYQS!1orXUeYkMPtEUdD-M2AeTZbbOZVp39tkwXDYZbexiUY)

mfc-node-win64.zip (https://mega.nz/#!E7hQAa4B!ihc2i17Yg4C1khOW5CEfICUZXvOpUMz3bWheE4X eOrE)

[horacio]

How do you install it? Sorry i couldnt find the answer

Read the first README.md from zip file there it writes the most important and there are links to download.
Much has already been written here as part of this topic. If after that is something incomprehensibly then ask questions freely.

[troxo]

That day was finally arrived;)
Each model is recorded in a separate folder now ;)
Download link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

first of all thanx for your effort,after the last update the script runing smoothly but i dont get anything in my browser http://localhost:9080/
any help would be appreciated
http://i.imgur.com/CBbdGra.png

[horacio]

first of all thanx for your effort,after the last update the script runing smoothly but i dont get anything in my browser http://localhost:9080/
any help would be appreciated

So you have a situation similar to this in the picture?

https://s20.postimg.org/a54yt8q0t/2349.jpg

A gray screen and a circling circular trying to load the page on the browser?

[troxo]

absolutely right

[CristianoA]

Read README.md file or use "precompiled" versions of updated original script

mfc-node-win32.zip (https://mega.nz/#!UuYXwYQS!1orXUeYkMPtEUdD-M2AeTZbbOZVp39tkwXDYZbexiUY)

mfc-node-win64.zip (https://mega.nz/#!E7hQAa4B!ihc2i17Yg4C1khOW5CEfICUZXvOpUMz3bWheE4X eOrE)

thanks for your work :)

any chance for mp4 file extension version ?

[poose22]

Read README.md file or use "precompiled" versions of updated original script

mfc-node-win32.zip (https://mega.nz/#!UuYXwYQS!1orXUeYkMPtEUdD-M2AeTZbbOZVp39tkwXDYZbexiUY)

mfc-node-win64.zip (https://mega.nz/#!E7hQAa4B!ihc2i17Yg4C1khOW5CEfICUZXvOpUMz3bWheE4X eOrE)

is this the same precompiled version you posted a while ago or is this a new release?

[wankxxx]

Has anybody gotten a mac version to work yet? I have tried everything and no luck. Im pretty terminal illiterate so Im not even sure what could be going wrong.

[supersonic80]

Has anybody gotten a mac version to work yet? I have tried everything and no luck. Im pretty terminal illiterate so Im not even sure what could be going wrong.

Download Nodejs and install it https://nodejs.org/dist/v6.11.1/node-v6.11.1.pkg

Download script https://github.com/sstativa/mfc-node/archive/master.zip

Unzip it, suppose it will be in your Downloads folder

Download ffmpeg and unpack it https://evermeet.cx/ffmpeg/ffmpeg-3.3.2.7z

Find ffmpeg file and drag-and-drop it in mfc-node-master folder

Start Terminal (Launchpad -> Others -> Terminal)
execute line by line

cd ~/Downloads/mfc-node-master
npm install
node main.js


When it starts, wait ~20 seconds and open url in your browser
http://localhost:9080

If it work, you can try to do the same with this package
https://codeload.github.com/horacio9a/mfc-node/zip/v2

[wankxxx]

OK I think i figured out part of the problem. I use another USER account on my mac for all my porn-y stuff. When I try to run anything in terminal from that account, nothing works. I followed the instructions perfectly.

Soooo, I logged into my main account and tried to install everything there and it seemed to work. Well kinda :confused: It installs everything per the instructions and when I go to http://localhost:9080 I see the models. but when I try to include one i get an ffmpeg error after it refreshes & it crashes

events.js:160
throw er; // Unhandled 'error' event
^

Error: spawn ffmpeg ENOENT
at exports._errnoException (util.js:1018:11)
at Process.ChildProcess._handle.onexit (internal/child_process.js:193:32)
at onErrorNT (internal/child_process.js:367:16)
at _combinedTickCallback (internal/process/next_tick.js:80:11)
at process._tickCallback (internal/process/next_tick.js:104:9)

and when I tried the other package I get the same grey screen with the loading circle like a few posts before

and when I tried the precompiled version from a while back i get the same error I got in my post before
Error: ENOENT: no such file or directory, open 'config.yml'

Id prefer to run everything on my "2nd" account. If thats possible. Its supposed to be an admin too if that helps, but I cant get anything to even run there. Im no computer dummy, just never had a use for learning to use terminal. So unless somebody can tell me what Im doing wrong, or our buddy Antihero comes back, this all seems like it might be WAY more trouble than its worth. At least for me.
Bummer. Means Im going to have to go back to screen recording only what Im awake for... without any sound... BOOO!

Thanks for all your help

[supersonic80]

OK I think i figured out part of the problem. I use another USER account on my mac for all my porn-y stuff. When I try to run anything in terminal from that account, nothing works. I followed the instructions perfectly.

Soooo, I logged into my main account and tried to install everything there and it seemed to work. Well kinda :confused: It installs everything per the instructions and when I go to http://localhost:9080 I see the models. but when I try to include one i get an ffmpeg error after it refreshes & it crashes

events.js:160
throw er; // Unhandled 'error' event
^

Error: spawn ffmpeg ENOENT
at exports._errnoException (util.js:1018:11)
at Process.ChildProcess._handle.onexit (internal/child_process.js:193:32)
at onErrorNT (internal/child_process.js:367:16)
at _combinedTickCallback (internal/process/next_tick.js:80:11)
at process._tickCallback (internal/process/next_tick.js:104:9)


the script cannot find ffmpeg file

The easiest way to fix it will be to copy ffmpeg in /usr/local/bin. If you downloaded you ffmpeg into Downloads directory, then the command will look like this
sudo cp ~/Downloads/ffmpeg /usr/local/bin

[c3po]

I'm using the precompiled version, but I notice some models are not picked up.

When I restart the program they are back.

Has it something to do on what server we login?

Read README.md file or use "precompiled" versions of updated original script

mfc-node-win32.zip (https://mega.nz/#!UuYXwYQS!1orXUeYkMPtEUdD-M2AeTZbbOZVp39tkwXDYZbexiUY)

mfc-node-win64.zip (https://mega.nz/#!E7hQAa4B!ihc2i17Yg4C1khOW5CEfICUZXvOpUMz3bWheE4X eOrE)

[horacio]

I've also added the option to choose between the 'ts' format like in the original version and the 'flv' format which I prefered so far.
So in the config.yml just type 'ts' or 'flv' like this:

fileFormat: ts

Updated download link is: https://codeload.github.com/horacio9a/mfc-node/zip/v2

[homah]

Really appreciate the work you put into this horacio, thanks

[CristianoA]

is this the same precompiled version you posted a while ago or is this a new release?

new release

[horacio]

This is a new version of something I posted 7 days ago. This time I did not want to be complicated and everything applies to the Win-x86 variant.
I see that most of you have a lot of problems with NodeJs installation so I hope this will overcome these problems.
Leave the files in the same directories as in rar. Here I am thinking for C:\nm-mfc\, C:\nm-cb\ and C:\nm-su\
nm.bat can be in root or C:\Windows. I recommend shortcut for nm.bat put in the taskbar for easy launch.
You need to edit config.yml files in all 3 directories. Make sure you put your own Login/Password combinations for ChaturBate and ShowUp.
For MFC read README.md and look the 2 screenshots. My recommendation is to use the Chrome browser with the installed add-on 'Play HLS M3u8'

Link for download: http://www.mediafire.com/file/9pwawfubv4j0o62/node-master-exe.rar

[aand101]

It sounds like you are running node.

If your run the 'node' command in your shell it will run node's own environment. You can't call NPM from in here.

Type '.exit' and this will exit node and go back to your shell. Now you can run npm.

Once that's done, you have to run 'node main' to start the script.

Open notepad. Enter the code given below and save it in the application folder as a .bat file (run.bat, runCapture.bat, etc.). Click on the script that will launch the node.

pushd %cd%

node main

Thanks moooby and Damianonymous for the help tips, after several attempts and research, I finally got the mfc-node working! :D :D :D

[mfmax]

(...)
I'm begining to use the precompiled version of the node and it works perfectly. Is it possible to edit the files name format (models) and create output folders separately? (useful to organize the recordings). Something that could be configured in the config.yml file, for example. Is there any way to do it?

That day was finally arrived;)
Each model is recorded in a separate folder now ;)
Download link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Read README.md file or use "precompiled" versions of updated original script

mfc-node-win32.zip (https://mega.nz/#!UuYXwYQS!1orXUeYkMPtEUdD-M2AeTZbbOZVp39tkwXDYZbexiUY)

mfc-node-win64.zip (https://mega.nz/#!E7hQAa4B!ihc2i17Yg4C1khOW5CEfICUZXvOpUMz3bWheE4X eOrE)


I'm very grateful and I admire your commitment (@horacio and @supersonic80) to improving mfc-node. Quick and frequent updates, as well as the attendance of our suggestions! ;)

[Damianonymous]

A gray screen and a circling circular trying to load the page on the browser?

Same with me, does not load pages.

Great update with choice of ts / flv format. It would be useful to create / not create a subfolder for models. Opening M3U8 to the default player as ZeChico version also.

[horacio]

Same with me, does not load pages.

Great update with choice of ts / flv format. It would be useful to create / not create a subfolder for models. Opening M3U8 to the default player as ZeChico version also.

I checked again zip files and everything works without any problems.
That's why I upload my precompiled version: http://stream-recorder.com/forum/showpost.php?p=92836&postcount=1106
BTW I am also now using my precompiled version because for start is enough to press enter in 'nm.bat' batch script.
My recommendation is to use the Chrome browser with the installed Play HLS M3u8 extension https://chrome.google.com/webstore/detail/play-hls-m3u8/ckblfoghkjhaclegefojbgllenffajdc/related
I'm sure that for Firefox exists a similar add-on but we have not discovered it yet.

[Damianonymous]

Yes, the exe version works immediately, the standard version sometimes works and sometimes loads without effect. On the other hand, the index moved from exe to node also works without problems. In Firefox you can try this:

https://addons.mozilla.org/pl/firefox/addon/native-hls-0-7-10/?src=api

[Hermiod]

Yes, the exe version works immediately, the standard version sometimes works and sometimes loads without effect. On the other hand, the index moved from exe to node also works without problems. In Firefox you can try this:

https://addons.mozilla.org/pl/firefox/addon/native-hls-0-7-10/?src=api

That works, thanks!

[wizard]

This is a new version of something I posted 7 days ago. This time I did not want to be complicated and everything applies to the Win-x86 variant.
I see that most of you have a lot of problems with NodeJs installation so I hope this will overcome these problems.
Leave the files in the same directories as in rar. Here I am thinking for C:\nm-mfc\, C:\nm-cb\ and C:\nm-su\
nm.bat can be in root or C:\Windows. I recommend shortcut for nm.bat put in the taskbar for easy launch.
You need to edit config.yml files in all 3 directories. Make sure you put your own Login/Password combinations for ChaturBate and ShowUp.
For MFC read README.md and look the 2 screenshots. My recommendation is to use the Chrome browser with the installed add-on 'Play HLS M3u8'

Link for download: http://www.mediafire.com/file/9pwawfubv4j0o62/node-master-exe.rar

I have tried this and made it work in less than 10 minutes for MFC. There could be some little tweaks in the future but even like this it works great.

By the way, I did check but it looks like there is no addon for mozilla that will enable playing of a hls streams within browser tab.

Great work and great share Horacio, many thanks !

[Damianonymous]

...I did check but it looks like there is no addon for mozilla that will enable playing of a hls streams within browser tab.

Two posts above, I have given a link to an extension that works in Firefox perfectly.

[horacio]

Yes, the exe version works immediately, the standard version sometimes works and sometimes loads without effect. On the other hand, the index moved from exe to node also works without problems. In Firefox you can try this:

https://addons.mozilla.org/pl/firefox/addon/native-hls-0-7-10/?src=api

@Damianonymous you are 100% right. And I have repeatedly regretted that it is not the same file size on my computer and in zip downloaded from github.
So i deleted index.html and made upload to github as a file, not through the github editor as before.
Also thanks for the 'Native HLS Playback' link for firefox. Now 'Mob./true' video preview working OK also on Firefox browser.
It looks even more stable than the Chrome version of the same add-on ;)
For the reason that you and some others do not like subfolder variant i made an exe version without subfolder option.
Download link for the contents of the 'C:/nm-mfc' directory: http://www.mediafire.com/file/pmcpn03p3nh044o/nm-mfc.rar

[t0wer10]

Read README.md file or use "precompiled" versions of updated original script

mfc-node-win32.zip (https://mega.nz/#!UuYXwYQS!1orXUeYkMPtEUdD-M2AeTZbbOZVp39tkwXDYZbexiUY)

mfc-node-win64.zip (https://mega.nz/#!E7hQAa4B!ihc2i17Yg4C1khOW5CEfICUZXvOpUMz3bWheE4X eOrE)

Thank you Supersonic80! works perfectly! THANK YOU!

[poose22]

This is a new version of something I posted 7 days ago. This time I did not want to be complicated and everything applies to the Win-x86 variant.
I see that most of you have a lot of problems with NodeJs installation so I hope this will overcome these problems.
Leave the files in the same directories as in rar. Here I am thinking for C:\nm-mfc\, C:\nm-cb\ and C:\nm-su\
nm.bat can be in root or C:\Windows. I recommend shortcut for nm.bat put in the taskbar for easy launch.
You need to edit config.yml files in all 3 directories. Make sure you put your own Login/Password combinations for ChaturBate and ShowUp.
For MFC read README.md and look the 2 screenshots. My recommendation is to use the Chrome browser with the installed add-on 'Play HLS M3u8'

Link for download: http://www.mediafire.com/file/9pwawfubv4j0o62/node-master-exe.rar
Is there any way to use .f4v instead of .flv/.ts? When using flv or ts, both VLC and MPC-HC load the videos for like 3 seconds each time I try to skip to different parts of the video. It get's annoying after a while :p. There was another version I saw on here a few weeks ago that used .f4v, and the videos played perfectly for me.

EDIT: Or if there's any suggestions you might have to make FLV's play better, I'd appreciate that as well.

[horacio]

Is there any way to use .f4v instead of .flv/.ts? When using flv or ts, both VLC and MPC-HC load the videos for like 3 seconds each time I try to skip to different parts of the video. It get's annoying after a while :p. There was another version I saw on here a few weeks ago that used .f4v, and the videos played perfectly for me.

EDIT: Or if there's any suggestions you might have to make FLV's play better, I'd appreciate that as well.

Obviously something is wrong with your pc adjustment. The first time I hear about such a problem. You can try rename flv to f4v with 'ren *.flv *.f4v' in Command prompt for the test but that is not the solution.
I guess you don't have the appropriate 'flv' codec so I suggest you install the latest version for your pc from this link:

https://www.codecguide.com/klcp_update.htm

[H1T0PR]

I'm using the node and testing some things with the code in main.js (horacio's version). I would like to know how to get city, country, age and occupation data too. I tried something straight like simply adding the lines:

city: m.bestSession.city,
country: m.bestSession.country,
age: m.bestSession.age,
occupation: m.bestSession.occupation,

In models.push and the same thing in capturingModels.push, like:

city: myModel.city,
country: myModel.country,
...etc

But the data appears as "undefined". So how do I get these data correctly?

[dm9452]

mfc node win is great. It'd be greater if the folder's name of complete recording is "ID - ModelName", not just "ModelName"

[horacio]

mfc node win is great. It'd be greater if the folder's name of complete recording is "ID - ModelName", not just "ModelName"

- Added model ID + model name to subdirectory name
- Added age, continent and city

Download link for node version: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for precompiled version (exe) for Win32: http://www.mediafire.com/file/2kj5dbpx94cf67r/nm-mfc2-subdirectory_with_model_ID_and_name.rar

For those who do not like a subfolders download above link and replace mfc.exe with this:

Download link for 'mfc.exe' only: http://www.mediafire.com/file/cuefjhka1555y4z/nm-mfc2.rar

[Damianonymous]

Is there any way to use .f4v instead of .flv/.ts? When using flv or ts, both VLC and MPC-HC load the videos for like 3 seconds each time I try to skip to different parts of the video. It get's annoying after a while :p. There was another version I saw on here a few weeks ago that used .f4v, and the videos played perfectly for me.

EDIT: Or if there's any suggestions you might have to make FLV's play better, I'd appreciate that as well.

Obviously something is wrong with your pc adjustment. The first time I hear about such a problem. You can try rename flv to f4v with 'ren *.flv *.f4v' in Command prompt for the test but that is not the solution.
I guess you don't have the appropriate 'flv' codec so I suggest you install the latest version for your pc from this link:

https://www.codecguide.com/klcp_update.htm

FLV source files are killer for old disks. While jumping forward on a large file, the disc works 100% and the movie freezes up for several dozen seconds. The mpv player does the best job but it still aches in the ass :D

[dm9452]

- Added model ID + model name to subdirectory name
- Added age, continent and city

Download link for node version: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for precompiled version (exe) for Win32: http://www.mediafire.com/file/2kj5dbpx94cf67r/nm-mfc2-subdirectory_with_model_ID_and_name.rar

For those who do not like a subfolders download above link and replace mfc.exe with this:

Download link for 'mfc.exe' only: http://www.mediafire.com/file/cuefjhka1555y4z/nm-mfc2.rar

I will wait for win64 version.:D

[H1T0PR]

I'm using the node and testing some things with the code in main.js (horacio's version). I would like to know how to get city, country, age and occupation data too. I tried something straight like simply adding the lines:

city: m.bestSession.city,
country: m.bestSession.country,
age: m.bestSession.age,
occupation: m.bestSession.occupation,

In models.push and the same thing in capturingModels.push, like:

city: myModel.city,
country: myModel.country,
...etc

But the data appears as "undefined". So how do I get these data correctly?

- Added model ID + model name to subdirectory name
- Added age, continent and city
(...)

Thank you horacio!

The item "continent" was already able to be pulled by the previous version (I managed to get it). Did you mean "country" instead "continent" in this new update? The items that still missing for me are these: country and occupation, how can I pull them too?

[horacio]

Thank you horacio!

The item "continent" was already able to be pulled by the previous version (I managed to get it). Did you mean "country" instead "continent" in this new update? The items that still missing for me are these: country and occupation, how can I pull them too?

- Added also ethnic, occupation and blurb ;)

Download link for node version: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for Win32 (mfc.exe + index.html): http://www.mediafire.com/file/7bqv45kbdxx7ddc/nm-mfc2-20170721.rar

For those who don't like a subfolders:

Download link for Win32 (mfc.exe + index.html): http://www.mediafire.com/file/dxab6c1xcrbc7um/nm-mfc2-20170721_no-sub-dir.rar

In the directory except 'mfc.exe' + 'index.html' must be also 'config.yml' and 'ffmpeg.exe' as before.

[CristianoA]

- Added also ethnic, occupation and blurb ;)

Download link for node version: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for Win32 (mfc.exe + index.html): http://www.mediafire.com/file/7bqv45kbdxx7ddc/nm-mfc2-20170721.rar

For those who don't like a subfolders:

Download link for Win32 (mfc.exe + index.html): http://www.mediafire.com/file/dxab6c1xcrbc7um/nm-mfc2-20170721_no-sub-dir.rar

In the directory except 'mfc.exe' + 'index.html' must be also 'config.yml' and 'ffmpeg.exe' as before.

works for Win64 too ?

[horacio]

works for Win64 too ?

I have Windows 7 win32 but my friend with Windows 10 win64 tested this files and everything works without any problems ;)

[wizard]

Tested this on my Win10 and everything works as a charm.

Huge thanks to Horacio for his work :)

[c3po]

The previous versions stopped overnight.

I'm on a VPN.

[QUOTE=horacio;92929]- Added also ethnic, occupation and blurb ;)

Download link for node version:

Download link for Win32 (mfc.exe + index.html): http://www.mediafire.com/file/7bqv45kbdxx7ddc/nm-mfc2-20170721.rar

/QUOTE]

[horacio]

The previous versions stopped overnight.
I'm on a VPN.

I did not test over VPN. We need more information about your problem with some screenshots?

[H1T0PR]

I'm using the node and testing some things with the code in main.js (horacio's version)...


...But the data appears as "undefined". So how do I get these data correctly?

All data is pulled. I was mistaken in the previous answer, it is necessary to wait a while until the data is loaded, if they are not already loaded or do not exist, the "undefined" appears.

Everything working correctly with the new version of node!

Thanks horacio!


The previous versions stopped overnight.

I'm on a VPN.
(...)

I tried connecting using VPN and it also did not work. By the direct connection, everything is OK!

[c3po]

Nothing can be made out with screenshots, because the application is shut down.
Starting it again works fine. And VPN is no problem.

I think the application stops round 1 or 2 CET
I did not test over VPN. We need more information about your problem with some screenshots?

[c3po]

Was probably blocked right now, because, my MFC browser session was also pending.

Did you implement the timeout sstativa implemented in his latest code too?

[horacio]

My latest version v.2.0.2 of mfc-node is ready to download:

Github link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for precompiled 'exe' Windows version: http://www.mediafire.com/file/9e30ga5cvnic0st/nm-mfc2-20170725.rar

Look config.yml because all the old and new options are listed there.
So from now is the same file for everyone about selecting a recording subfolder or not. New in config.yml is this:

createModelDirectory: true # If you want all the files from same model be recorded in the separate subdirectory
directoryFormat: id+nm # You can choose between 'id+nm','nm+id','id' and 'nm' separate subdirectory format (Of course only if the previous option is 'true')

where 'id' is MFC model ID and 'nm' is MFC model name.

[xxhieixx]

Since it has become painfully clear that Mr.antihero has gone AWOL. I would like to see someone step up and redesign his CamGirlzREC.
No offense to those of you working on node but node was always just a work around, we need a more permanent solution.

[horacio]

Since it has become painfully clear that Mr.antihero has gone AWOL. I would like to see someone step up and redesign his CamGirlzREC.
No offense to those of you working on node but node was always just a work around, we need a more permanent solution.

Each of us has different wishes how must look our MFC program and what options it should have. Just in the example of 'CamGirlzREC' I was convinced of it. At a time when @antihero was active and I gave him some of my suggestions that he accepted except for the last about file format who is important for me but not for most of you. For this reason, I have added to the node the option of choosing the options we are discussing. As far as the 'permanent solution' from the practice is concerned, it has been proven that the node is a more durable solution because there are so many people who working on them and when one of them 'disappears' like an @antihero, the node project goes further because they are not dependent on individuals like @antihero or earlier @elgero etc
Most important thing for me is Chinese proverb: 'No matter what color is the cat, as long as it can catch mice'

[phuongtrinhqn1102]

Its a SMITH Thing t-shirt (https://www.sunfrog.com/search/?81633&cId=75&search=SMITH) Its a SMITH Thing t-shirt ITS A SMITH THING, YOU WOULDNT UNDERSTAND ITS A SMITH THING YOU WOULDNT UNDERSTAND T Shirt (https://www.sunfrog.com/search/?81633&cId=75&search=SMITH),Its a SMITH Thing
Its A SMITH thing, you wouldnt understand !! Its A SMITH thing,…Smith - The name, the myth, the legend
Smith - The name,…Dr. Who Inspired Run Like You Blinked T-shirt

[horacio]

I am looking for a way how to have as much data for MFC models as possible on the browser page, and for that we don't have to remove or reduce some data.
For that reason I have keep all the data without reduce, and to keep everything easy to access, I duplicated some functions from the left to the right side of the browser.
I'd like some of you to try it out and say your mind if that makes sense?

Download link for test 'index.html': http://www.mediafire.com/file/wb6x2ahtu4a5so8/nm-mfc2-20170725a.rar

So you need to replace the existing 'index.html' with this one.

[moooby]

I am looking for a way how to have as much data for MFC models as possible on the browser page, and for that we don't have to remove or reduce some data.
For that reason I have keep all the data without reduce, and to keep everything easy to access, I duplicated some functions from the left to the right side of the browser.
I'd like some of you to try it out and say your mind if that makes sense?

Download link for test 'index.html': http://www.mediafire.com/file/wb6x2ahtu4a5so8/nm-mfc2-20170725a.rar

So you need to replace the existing 'index.html' with this one.

I like the layout of this index.html file. It's nice having all the fields available.

I would like to make a suggestion though. Would it be possible to make the header always apprear at the top. When you scroll down the page, you lose the fist row and the name of every column.

[horacio]

I like the layout of this index.html file. It's nice having all the fields available.

I would like to make a suggestion though. Would it be possible to make the header always apprear at the top. When you scroll down the page, you lose the fist row and the name of every column.

I'm glad you like this way of displaying all data for MFC models.
I agree that it would be good to keep an eye on the first row with names. I'm not an expert for html but I hope somebody else will find a solution to it.
This is not a problem for me, because I can immediately recognize what the data is about.
I often use the F3 search option on Chrome to search, and most importantly, I can easily include the recording when I found a model that I'm interested in.

[Damianonymous]

For me, these indexes are too big. Too many empty and unnecessary columns, Topic ... hmm ... I never read that, maybe because I do not know the language :D In a word, all columns should fit in width without scrolling :cool:

[Hermiod]

My latest version v.2.0.2 of mfc-node is ready to download:

Github link is always the same: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for precompiled 'exe' Windows version: http://www.mediafire.com/file/9e30ga5cvnic0st/nm-mfc2-20170725.rar

Look config.yml because all the old and new options are listed there.
So from now is the same file for everyone about selecting a recording subfolder or not. New in config.yml is this:

createModelDirectory: true # If you want all the files from same model be recorded in the separate subdirectory
directoryFormat: id+nm # You can choose between 'id+nm','nm+id','id' and 'nm' separate subdirectory format (Of course only if the previous option is 'true')

where 'id' is MFC model ID and 'nm' is MFC model name.

I tried yoru version again, it still wont work, if I use my config file (with your adicional variables) it crashes on start, just using your files it starts but I can't open it in chrome or firefox (just keeps loading).

[Damianonymous]

That is true, you have to be very lucky to open the page, I have only been a few times

[supersonic80]

That is true, you have to be very lucky to open the page, I have only been a few times

Use DeveloperTools in Chrome to trace the error.

If there is inconsistency in opening the page then I suppose the data received from the script is corrupted.

Sometimes this could happen if the model uses some "weird" characters in her fields (ex. topic) and your browser fails to parse this data correctly.

[horacio]

And I've noticed that index.html loads very slowly because I put all possible models data.
Obviously, some of you having a slower computers or a slower Internet connection are having problems.
It was a test so I decided to remove all the data which take longer time to load after the changes on the MFC server itself.
Those who want to have all model data can always return the index.html that was earlier ;)
I have sorted models by the 'state' criteria so now at the top you can see which models are currently being recorded so that you can stop recording if you don't want it.
There are still some minor changes to the code.

Download link for precompiled node.js 'exe' files for Windows is: http://www.mediafire.com/file/chn6ubmbvy6ok2q/nm-mfc2-20170731.rar

[Damianonymous]

Horacio, the problem only concerned the index in your Node.js versions. Your exe, Supersonic and ZeChico indexes open in 2-3 seconds. My 100 MB connection should not be a problem here. As Sergey wrote, there must be some problem with the transmission of data from the script.

[supersonic80]

I precompiled alternative version as "proof of concept". Who wants to try it?

mfc-node-win64.zip (https://mega.nz/#!4jgUyawS!nEGEWzh0VLaFwrhZAalgYyQXlhC5dlZO1hxpW31 cR-4)

mfc-node-win32.zip (https://mega.nz/#!9yx3UCxB!HeRc-IpaxLqkpBglmtlE6k5e3hUGhhfHeN0CsnWrgkY)

Config files should be compatible, just use your config.yml instead of file in the archive.

[Hermiod]

I have an i7 (4th generation) with a 50MB connection, I dont think its my pc being slow or the internet being slow, i'll try the simpler index.html

[Damianonymous]

I precompiled alternative version as "proof of concept". Who wants to try it?

mfc-node-win64.zip (https://mega.nz/#!4jgUyawS!nEGEWzh0VLaFwrhZAalgYyQXlhC5dlZO1hxpW31 cR-4)

mfc-node-win32.zip (https://mega.nz/#!9yx3UCxB!HeRc-IpaxLqkpBglmtlE6k5e3hUGhhfHeN0CsnWrgkY)

Config files should be compatible, just use your config.yml instead of file in the archive.

https://s2.postimg.org/vn2aht92h/Miss_Noir_xx.jpg

Very cool index, you do with Horacio a great job. The error I noticed, createModelDirectory is changing itself back to false on true. I wonder how many people use your application, looking at the number of views of the topic (Last 44 days - 88.991 views), interesting how many people bought you coffee?

[supersonic80]

Very cool index, you do with Horacio a great job. The error I noticed, createModelDirectory is changing itself back to false on true. I wonder how many people use your application, looking at the number of views of the topic (Last 44 days - 88.991 views), interesting how many people bought you coffee?

Yes, you are right about createModelDirectory. That version should not have this issue:
win64 (https://mega.nz/#!JuBmiYgQ!IDoK72H9szMr0Oacmw2Z1ArL-jxqB7mtxiKQoeHZGdA)

win32 (https://mega.nz/#!8iRDgYzR!FJPhWv9cWj8SVe6w5krj5a5K5-vIV6TUKFmfdO-Ea0w)

And to answer your question you should open the link, all info is there, looks like so far 14 coffees have been bought by 3 people.

[Hermiod]

Yes, you are right about createModelDirectory. That version should not have this issue:
win64 (https://mega.nz/#!JuBmiYgQ!IDoK72H9szMr0Oacmw2Z1ArL-jxqB7mtxiKQoeHZGdA)

win32 (https://mega.nz/#!8iRDgYzR!FJPhWv9cWj8SVe6w5krj5a5K5-vIV6TUKFmfdO-Ea0w)

And to answer your question you should open the link, all info is there, looks like so far 14 coffees have been bought by 3 people.

Whos version of mfc node is that? I cant seem to run horatio's using mfc node, will try that one (still using an old ZeChico version)

[Damianonymous]

This is an original, updated version of sstativa https://github.com/sstativa/mfc-node converted to exe.

[horacio]

Here is my version of node.js MFC Recorder v.2.0.6
There are plenty of new stuff. Basically, config.yml has remained the same which means that all of the options so far are still present.
The instructions are written in config.yml. If you click on the thumbnail image, you get the current high-resolution model image (960x720).
For 'No Mobile Feed' models you get a 320x240 image link that you need to open in your new browser window if you want to see the situation in the room.
If you want to enter the room you should as far as click on State/Online. You will see other news after launching the program;)

Node.js zip files download link is: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for precompiled node.js 'exe' files for Windows is: http://www.mediafire.com/file/usmynn78wxou8so/nm-mfc2-20170803.rar

[moooby]

Node.js zip files download link is: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for precompiled node.js 'exe' files for Windows is: http://www.mediafire.com/file/usmynn78wxou8so/nm-mfc2-20170803.rar

Hello Horacio, I've tried the latest version of your node script. I'm having issues with loading the UI in my browser. I can see the spinner however, the model data does not get displayed. It only shows the spinner. I have tried it on Firefox, IE, and Edge with the same result. I have tried both the zip and git-hub versions with the same result. Everything was working perfectly until this latest UI update. The script is still able to record the models I've already added to the config file.

Is anyone else having this issue?

Thanks.

[horacio]

Hello Horacio, I've tried the latest version of your node script. I'm having issues with loading the UI in my browser. I can see the spinner however, the model data does not get displayed. It only shows the spinner. I have tried it on Firefox, IE, and Edge with the same result. I have tried both the zip and git-hub versions with the same result. Everything was working perfectly until this latest UI update. The script is still able to record the models I've already added to the config file.

Is anyone else having this issue?

Thanks.

Probably someone would say that he has a similar problem so I assume that's something about your windows.
Try replacing my index.html with this original:

http://www.mediafire.com/file/t3uxk3kx6tkr837/index.rar

This can help to find where there is a possible error.

[moooby]

Probably someone would say that he has a similar problem so I assume that's something about your windows.
Try replacing my index.html with this original:

http://www.mediafire.com/file/t3uxk3kx6tkr837/index.rar

This can help to find where there is a possible error.

I tried the original index.html and it worked fines. I then switched back to your index.html and it was working again. I'm not sure what happened but it seems to be working again now.

[Hermiod]

Here is my version of node.js MFC Recorder v.2.0.6
There are plenty of new stuff. Basically, config.yml has remained the same which means that all of the options so far are still present.
The instructions are written in config.yml. If you click on the thumbnail image, you get the current high-resolution model image (960x720).
For 'No Mobile Feed' models you get a 320x240 image link that you need to open in your new browser window if you want to see the situation in the room.
If you want to enter the room you should as far as click on State/Online. You will see other news after launching the program;)

Node.js zip files download link is: https://codeload.github.com/horacio9a/mfc-node/zip/v2

Download link for precompiled node.js 'exe' files for Windows is: http://www.mediafire.com/file/usmynn78wxou8so/nm-mfc2-20170803.rar

This version of node finally works for me, thanks !

One thing I haven ot seen in mfc-node which was usefull in mfc-recorder is order by models being recorded, is that possible to be done?

EDIT: Nevermnid, just noticed that function is already there. (only noticed once I added my models list)

[horacio]

This version of node finally works for me, thanks !

One thing I haven ot seen in mfc-node which was usefull in mfc-recorder is order by models being recorded, is that possible to be done?

EDIT: Nevermnid, just noticed that function is already there. (only noticed once I added my models list)

I'm glad that this version is working for you.
Meanwhile I decided to change the concept of index.html.
I remove 'blurb' and 'topic' from the main table and switched to 'spinner'.
So far, search has searched only 'model name', 'city' and 'country' in 'spinner'.
Now added other text information from 'spinner' ('ethnic', 'occupation', 'blurb' and 'topic') for search sort.
I increased the spinner width twice because of the reduction in the number of rows.
Instead of 'blurb' and 'topic' I returned all the other data to the main table so it is now possible to sort the models according to different criteria.
Probably this has slowed down the search, but it is much easier to find certain models according to certain criteria.

Link for new index.html download is: http://www.mediafire.com/file/d0d38dvvycnf0jk/index_20170805.rar

[Hermiod]

I'm glad that this version is working for you.
Meanwhile I decided to change the concept of index.html.
I remove 'blurb' and 'topic' from the main table and switched to 'spinner'.
So far, search has searched only 'model name', 'city' and 'country' in 'spinner'.
Now added other text information from 'spinner' ('ethnic', 'occupation', 'blurb' and 'topic') for search sort.
I increased the spinner width twice because of the reduction in the number of rows.
Instead of 'blurb' and 'topic' I returned all the other data to the main table so it is now possible to sort the models according to different criteria.
Probably this has slowed down the search, but it is much easier to find certain models according to certain criteria.

Link for new index.html download is: http://www.mediafire.com/file/d0d38dvvycnf0jk/index_20170805.rar

Your mfc-node is randomly crashing:

events.js:160
throw er; // Unhandled 'error' event
^
Error: read ECONNRESET
at exports._errnoException (util.js:1018:11)
at TCP.onread (net.js:568:26)

Is there a windows program I can run to make sure it keeps running? Would some sort of bat file work (start/onExit_Restart)?

[horacio]

Your mfc-node is randomly crashing:

events.js:160
throw er; // Unhandled 'error' event
^
Error: read ECONNRESET
at exports._errnoException (util.js:1018:11)
at TCP.onread (net.js:568:26)

Is there a windows program I can run to make sure it keeps running? Would some sort of bat file work (start/onExit_Restart)?

These errors are thrown by MFCAuto module that handles communication with MFC servers.

You can try to install https://www.npmjs.com/package/forever

More about that you can found there: https://github.com/sstativa/mfc-node/issues/34

[Hermiod]

These errors are thrown by MFCAuto module that handles communication with MFC servers.

You can try to install https://www.npmjs.com/package/forever

More about that you can found there: https://github.com/sstativa/mfc-node/issues/34

Thanks I`ll try that, I am using a bat file.

[Hermiod]

Back to being unable to load index.html, I checked the one you posted a few posts ago and that one does not work either, the following error shows up in the console:

Error: malformed URI sequence
vm.refresh/</vm.serverModels<@http://localhost:9080/:507:61
vm.refresh/<@http://localhost:9080/:489:31
e/<@https://code.angularjs.org/1.5.11/angular.min.js:132:434
$eval@https://code.angularjs.org/1.5.11/angular.min.js:147:65
$digest@https://code.angularjs.org/1.5.11/angular.min.js:144:123
$apply@https://code.angularjs.org/1.5.11/angular.min.js:147:361
l@https://code.angularjs.org/1.5.11/angular.min.js:99:192
K@https://code.angularjs.org/1.5.11/angular.min.js:103:376
tg/</N.onload@https://code.angularjs.org/1.5.11/angular.min.js:104:338

[horacio]

Thanks I`ll try that, I am using a bat file.

So you use the mfc.exe version?
In this case, it is enough to start the program again to get an xchat address that is not currently overloaded.
I have to admit that this happens to me very rarely.

[horacio]

Back to being unable to load index.html, I checked the one you posted a few posts ago and that one does not work either, the following error shows up in the console:

Error: malformed URI sequence
vm.refresh/</vm.serverModels<@http://localhost:9080/:507:61
vm.refresh/<@http://localhost:9080/:489:31
e/<@https://code.angularjs.org/1.5.11/angular.min.js:132:434
$eval@https://code.angularjs.org/1.5.11/angular.min.js:147:65
$digest@https://code.angularjs.org/1.5.11/angular.min.js:144:123
$apply@https://code.angularjs.org/1.5.11/angular.min.js:147:361
l@https://code.angularjs.org/1.5.11/angular.min.js:99:192
K@https://code.angularjs.org/1.5.11/angular.min.js:103:376
tg/</N.onload@https://code.angularjs.org/1.5.11/angular.min.js:104:338

I assume this is happening because of a symbol that appears in 'blurb' or 'topic' so i made a version without this data so try it.

The last index version is: http://www.mediafire.com/file/lnwmasodu18ayt6/index_20170806.rar

Index version without 'blurb' and 'topic' is: http://www.mediafire.com/file/eemh0d4pq6kwjzz/index_20170807_no_blurb.rar

To remind, other v.2.0.6 'exe' files are here: http://www.mediafire.com/file/usmynn78wxou8so/nm-mfc2-20170803.rar

[Hermiod]

So you use the mfc.exe version?
In this case, it is enough to start the program again to get an xchat address that is not currently overloaded.
I have to admit that this happens to me very rarely.

Using the normal node.js version. Will try 'forever'.

Index version without 'blurb' and 'topic' is: http://www.mediafire.com/file/eemh0d4pq6kwjzz/index_20170807_no_blurb.rar


Same error, will try to debug it.

EDIT:This seems to have allowed it to load
//if (m.topic && m.topic.length > 3) {m.topic = decodeURIComponent(m.topic).substr(0,160);}
m.topic ='';

[horacio]

Same error, will try to debug it.

EDIT:This seems to have allowed it to load
//if (m.topic && m.topic.length > 3) {m.topic = decodeURIComponent(m.topic).substr(0,160);}
m.topic ='';

You're right, I did not completely remove the 'blurb' and 'topic'. Here's a corrected index.html so try it now.

Link for corrected version without 'blurb' and 'topic' is: http://www.mediafire.com/file/cgj7wb5znfjtjfa/index_20170808_no_topic.rar

main.js is also changed so you can try both versions of 'index.html' for the test.

Download link for all files in zip: https://github.com/horacio9a/mfc-node/archive/v2.zip

[Syl0pt]

Hey Horacio,

really liking the program, but i'm confused about what the 'queue' option is for in the config file. I'm confused on how it works or how I can/should use it.

I haven't even messed with it yet because i didn't want to screw things up with my current node settings.

Thanks

[supersonic80]

You should not touch it, it is for "internal" use only.

All your requests from WebUI go to the queue. Then the script checks the queue every 30 seconds and apply your changes.



Hey Horacio,

really liking the program, but i'm confused about what the 'queue' option is for in the config file. I'm confused on how it works or how I can/should use it.

I haven't even messed with it yet because i didn't want to screw things up with my current node settings.

Thanks

[Syl0pt]

You should not touch it, it is for "internal" use only.

All your requests from WebUI go to the queue. Then the script checks the queue every 30 seconds and apply your changes.

Ok, good to know...

Thanks for the reply.

[Hermiod]

Can someone tell me who is Celestia Vega and why are there almost 13k people in her room?

EDIT: 15k now, she seems to be online on a lot of social media
EDIT2: 16.5k, is she famous or something?
EDIT3: 17.1k and the server is dead :lol:

[korbatjov]

Can someone tell me who is Celestia Vega and why are there almost 13k people in her room?

EDIT: 15k now, she seems to be online on a lot of social media
EDIT2: 16.5k, is she famous or something?
EDIT3: 17.1k and the server is dead :lol:

She is and another girl called zoie burgher was on twitch and youtube and posted tease pics for a while, then started to post titt pics and asked for subs and then they would post nudes/cam and i think celestia vega just hit one of those "goals" so she went on to MFC, someone els might have better insight in this since I have only seen the stuff on reddit posts etc.

[Hermiod]

She is and another girl called zoie burgher was on twitch and youtube and posted tease pics for a while, then started to post titt pics and asked for subs and then they would post nudes/cam and i think celestia vega just hit one of those "goals" so she went on to MFC, someone els might have better insight in this since I have only seen the stuff on reddit posts etc.

Thanks for the info.

Apparently MFC cant handle the load, mfc-node keeps loosing the connection.

[Damianonymous]

I do not know who it is, but its YouTube channel is quite popular:

https://www.youtube.com/channel/UCeFIF66saXQVxRiyckv820Q

[Nemesis]

She had at her highest point more than 20 k people in her room!
But she had not more then 10-20 premium users in her chat, so she's not really a money maker for mfc!
99,999...% were guests, but she ruined my day, i was in a true private with a girl...LOL :D
MFC should set a guest limit, 2 or 3 k and something like this can't happen!;)

[marabu]

Since the beginning of August I have problems with record a streams with ffmpeg. Periodically skipped pieces of streams for several seconds. It's easy to check if you convert a ts-file to mkv, for example, use ffmpeg. The resulting video will be shorter by a few minutes (depending on the length of the original video). I can place an example if necessary.

I ask you to check if you have similar problems. Does anyone have a program / script to write the stream using the rtmp protocol IN AUTOMATIC MODE (I do not mean a utility that requires a specific link to the page with a video or url stream)?

At the moment I'm trying to understand whether this problem is local or is another problem with MFC servers. In addition, there are a large number of streams that are not written in the current way. Recording streams using the rtmp protocol is more reliable and universal at the moment.

[horacio]

Since the beginning of August I have problems with record a streams with ffmpeg. Periodically skipped pieces of streams for several seconds. It's easy to check if you convert a ts-file to mkv, for example, use ffmpeg. The resulting video will be shorter by a few minutes (depending on the length of the original video). I can place an example if necessary.

I ask you to check if you have similar problems. Does anyone have a program / script to write the stream using the rtmp protocol IN AUTOMATIC MODE (I do not mean a utility that requires a specific link to the page with a video or url stream)?

At the moment I'm trying to understand whether this problem is local or is another problem with MFC servers. In addition, there are a large number of streams that are not written in the current way. Recording streams using the rtmp protocol is more reliable and universal at the moment.

Just 2 days ago I saw your post on https://github.com/sstativa/mfc-node/issues/37 with the same topic but I have not yet tested myself.
Look my post (http://stream-recorder.com/forum/showpost.php?p=93533&postcount=230). TS file recorded with that script when with ffmpeg is converted to FLV using Horacio_TS_FIX.bat is not shorter, exactly the opposite, flv is 1 second longer than TS original.

https://s20.postimg.org/509d951dp/2377.jpg

Otherwise, I tested my last version of mfc.exe (http://stream-recorder.com/forum/showpost.php?p=93372&postcount=1166) yesterday and see that everything is still working without a errors :)

[marabu]

Just 2 days ago I saw your post on https://github.com/sstativa/mfc-node/issues/37 with the same topic but I have not yet tested myself.
Look my post (http://stream-recorder.com/forum/showpost.php?p=93533&postcount=230). TS file recorded with that script when with ffmpeg is converted to FLV using Horacio_TS_FIX.bat is not shorter, exactly the opposite, flv is 1 second longer than TS original.

Otherwise, I tested my last version of mfc.exe (http://stream-recorder.com/forum/showpost.php?p=93372&postcount=1166) yesterday and see that everything is still working without a errors :)

but you use files from chaturbate! i don't have problems with this site. i have problems with ts-videos recorded from MFC

[horacio]

but you use files from chaturbate! i don't have problems with this site. i have problems with ts-videos recorded from MFC

Here I just made a test and recorded 5 MFC files in TS format with my version of MFC Recorder v.2.0.6 and converted them later to FLV.
File lengths are the same in both formats and I have not noticed any errors.

https://s29.postimg.org/dxsdhjhev/2382.jpg

[Hermiod]

What can I use to "crop" ts files?

[Damianonymous]

Try FFmpeg + WinFF for ease of use.

[Hermiod]

Try FFmpeg + WinFF for ease of use.

"Winff is a frontend for FFMPEG that runs on Windows XP to Windows 10 and Linux. It will convert most any video file that FFmpeg will convert. WinFF does multiple files in multiple formats at one time. You can for example convert mpeg's, flv's, f4v, and mov's, all into avi's all at once. F4V to AVI."

What format do I convert it to and then what do I use?

[Gyttiie]

Hi. is it possible to make automatically reconnect to the server when i lost my internet for 1 minute?

it's very annoying when i lost my internet for a few mins and mfc-node can't reconnect to the server automatically and i should go to my pc and write "node.main.js".

[fuggers]

i can no longer get the http://localhost:9080/ page to open. is anyone else having this issue?

[yerry28]

yes ,,offline for me

[CristianoA]

same problem here code.angularjs.org timeout

[CristianoA]

meanwhile you can use this commands to add models

example
http://localhost:9080/models/include?uid=24298949
http://localhost:9080/models/include?nm=LittlePatrice

[fuggers]

meanwhile you can use this commands to add models

example
http://localhost:9080/models/include?uid=24298949
http://localhost:9080/models/include?nm=LittlePatrice

cheers for that.

page working for me now

[Hermiod]

Hi. is it possible to make automatically reconnect to the server when i lost my internet for 1 minute?

it's very annoying when i lost my internet for a few mins and mfc-node can't reconnect to the server automatically and i should go to my pc and write "node.main.js".

You can use a bat file or forever

Bat file contents:
@echo off
SET foo=1
:initiate
ECHO Starting program, attempt %foo%
node main.js
set /A foo=foo+1
timeout 30
goto :initiate


Forever:
https://www.npmjs.com/package/forever

My node disconnects 3 to 4 times a day. The bad part is im getting about 80GB of files a day :D

[Gyttiie]

You can use a bat file or forever

Bat file contents:
@echo off
SET foo=1
:initiate
ECHO Starting program, attempt %foo%
node main.js
set /A foo=foo+1
timeout 30
goto :initiate


Forever:
https://www.npmjs.com/package/forever

My node disconnects 3 to 4 times a day. The bad part is im getting about 80GB of files a day :D

I don't know did i do correct, i just wrote in console "npm install -g forever" (without downloading anything).

But i'm not sure did it help, because i turned off my wifi router for a minute and turn in back on, mfc-node didn't reconnect back to the servers and i needed to write - node main.js again.


If i did not correct, can you, Please, upload somewhere your mfc-node and i would download it and paste my config

[Hermiod]

I don't know did i do correct, i just wrote in console "npm install -g forever" (without downloading anything).

But i'm not sure did it help, because i turned off my wifi router for a minute and turn in back on, mfc-node didn't reconnect back to the servers and i needed to write - node main.js again.


If i did not correct, can you, Please, upload somewhere your mfc-node and i would download it and paste my config

Installation
$ [sudo] npm install forever -g

Usage
forever start app.js

I suppose you did not use the start command, failing to download might be caused by your firewall. To test if it was installed try:
forever --help

Those commands might only work inside a node.js command prompt. I am still using the bat file, but Horacio recommended 'forever'.

[Gyttiie]

You can use a bat file or forever

Bat file contents:
@echo off
SET foo=1
:initiate
ECHO Starting program, attempt %foo%
node main.js
set /A foo=foo+1
timeout 30
goto :initiate


Forever:
https://www.npmjs.com/package/forever

My node disconnects 3 to 4 times a day. The bad part is im getting about 80GB of files a day :D

Installation
$ [sudo] npm install forever -g

Usage
forever start app.js

I suppose you did not use the start command, failing to download might be caused by your firewall. To test if it was installed try:
forever --help

Those commands might only work inside a node.js command prompt. I am still using the bat file, but Horacio recommended 'forever'.

Now it's working, thanks.

There's written:
"warn: --minUptime not set. Defaulting to: 1000ms
warn: --spinSleepTime not set. Your script will exit if it does not stay
up for at least 1000ms
info: Forever processing file: main.js"

As i understood, if during 1000ms i wont have internet connection, it will stop recording till i wont write again forever start main.js ?

Also, i want to ask you, is it always gonna be that window of ffmpeg.exe will be jumping out when the new model is online?

[guestbuy]

Also, i want to ask you, is it always gonna be that window of ffmpeg.exe will be jumping out when the new model is online?

I'm curious of the same thing. It appears it is running correctly since I can access the web URL, but it does throw up a ffmpeg process for every model recording. Is there a way to only show the usual process? Using Windows.

[Hermiod]

Just started having isues of cams starting to recotd and 5 seconds later stopping, anyone else having this issue?

EDIT: It stopped happening, occured from around 6:12 GMT to 6:17 GMT.

[bigtymer88]

If anyone finds this useful. .pm me and I will hook u up

http://imgur.com/a/ejFog

[Hermiod]

Tip: Backup your config file, because if you run out of space it will get deleted. :eek: :mad: :D

[horacio]

If you want a reliable MFC script that runs without any difficulty in the last half of the year and if you don't want to record a large number of models at the same time then this is the right script for you.

Page link is: https://github.com/horacio9a/myfreecams-anonymous

Download link for zip file is: https://codeload.github.com/horacio9a/myfreecams-anonymous/zip/master

[TMK]

Any plans to add support for recording from cammunity.com? It is run by the same folks as MFC and I can see some of my favourite MFC models using it in future for the non-nude parts of their shows since it does not negatively impact MFC camscore. Would it be safe to assume it uses the same underlying technology?

[troxo]

If you want a reliable MFC script that runs without any difficulty in the last half of the year and if you don't want to record a large number of models at the same time then this is the right script for you.

Page link is: https://github.com/horacio9a/myfreecams-anonymous

Download link for zip file is: https://codeload.github.com/horacio9a/myfreecams-anonymous/zip/master

Hi horacio
i'm geting the following error when im trying pip install -r Requrements.txt

https://imgur.com/a/uQEHL

Q:\-mfc-py>pip install -r Requirements.txt
Collecting urllib==1.21.1 (from -r Requirements.txt (line 1))
Could not find a version that satisfies the requirement urllib==1.21.1 (from -r Requirements.txt (line 1)) (from versions: )
No matching distribution found for urllib==1.21.1 (from -r Requirements.txt (line 1))

Q:\-mfc-py>
any help??

[horacio]

Hi horacio
i'm geting the following error when im trying pip install -r Requrements.txt

https://imgur.com/a/uQEHL

Q:\-mfc-py>pip install -r Requirements.txt
Collecting urllib==1.21.1 (from -r Requirements.txt (line 1))
Could not find a version that satisfies the requirement urllib==1.21.1 (from -r Requirements.txt (line 1)) (from versions: )
No matching distribution found for urllib==1.21.1 (from -r Requirements.txt (line 1))

Q:\-mfc-py>
any help??

It is best to install each module individually one by one like this:

pip install urllib
pip install DateTime
pip install requests
pip install Command
pip install colorama
pip install termcolor
pip install configparser
pip install websocket

... but before that look what modules you already have with this command:

pip list

[troxo]

It is best to install each module individually one by one like this:

pip install urllib
pip install DateTime
pip install requests
pip install Command
pip install colorama
pip install termcolor
pip install configparser
pip install websocket

... but before that look what modules you already have with this command:

pip list

ok here is the pip list results
Q:\Python27>pip list
certifi (2017.7.27.1)
chardet (3.0.4)
colorama (0.3.9)
Command (0.1.0)
configparser (3.5.0)
DateTime (4.2)
gevent (1.2.2)
greenlet (0.4.12)
idna (2.6)
pip (9.0.1)
pytz (2017.2)
requests (2.18.4)
setuptools (28.8.0)
termcolor (1.1.0)
urllib (1.21.1)
urllib3 (1.22)
websocket (0.2.1)
zope.interface (4.4.2)

but im geting this error from the scripts

#################################################
### MFCR ###### R E C O R D I N G ###### 24/7 ###
############### anberjade #######################
#################################################
Traceback (most recent call last):
File "mfcr.py", line 4, in <module>
from websocket import create_connection
ImportError: cannot import name create_connection

Waiting for 23

[Damianonymous]

Traceback (most recent call last):
File "mfcr.py", line 4, in <module>
from websocket import create_connection
ImportError: cannot import name create_connection

pip install websocket-client

[troxo]

pip install websocket-client

wow!!! is working, thanks for your help Horacio and Damianonymous

[horacio]

pip install websocket-client

Many thanks @Damianonymous, I just put a new one Requirements.txt with this text:

urllib==1.21.1
DateTime==4.1.1
requests==2.18.1
Command==0.1.0
colorama==0.3.7
termcolor==1.1.0
configparser==3.5.0
websocket==0.2.1
websocket-client==0.37.0

[john1291]

Many thanks @Damianonymous, I just put a new one Requirements.txt with this text:

urllib==1.21.1
DateTime==4.1.1
requests==2.18.1
Command==0.1.0
colorama==0.3.7
termcolor==1.1.0
configparser==3.5.0
websocket==0.2.1
websocket-client==0.37.0

hello. i tried making it work but without sucess...when i try to install "pip install urllib" i get this error:

"Could not find a version that satisfies the requirement urllib (from versions: )
No matching distribution found for urllib"

....all the others were installed. also when i try the command "pip list" i only get:

beautifulsoup4 (4.3.2)
colorama (0.3.9)
Command (0.1.0)
configparser (3.5.0)
DateTime (4.2)
futures (3.0.5)
gevent (1.2.2)
greenlet (0.4.12)
livestreamer (1.12.2-cb)
pip (9.0.1)
psutil (5.0.0)
pytz (2017.2)
requests (2.4.3)
setuptools (20.10.1)
singledispatch (3.4.0.3)
six (1.10.0)
termcolor (1.1.0)
urllib3 (1.9.1)
websocket (0.2.1)
zope.interface (4.4.2)

no urllib installed....in the Requirements.txt file i have
urllib==1.21.1
DateTime==4.1.1
requests==2.18.1
Command==0.1.0
colorama==0.3.7
termcolor==1.1.0
configparser==3.5.0
websocket==0.2.1

can someone help me with this problem / how to make this work? many thx in advance for your help.

[horacio]

hello. i tried making it work but without sucess...when i try to install "pip install urllib" i get this error:

"Could not find a version that satisfies the requirement urllib (from versions: )
No matching distribution found for urllib"

....all the others were installed. also when i try the command "pip list" i only get:

beautifulsoup4 (4.3.2)
colorama (0.3.9)
Command (0.1.0)
configparser (3.5.0)
DateTime (4.2)
futures (3.0.5)
gevent (1.2.2)
greenlet (0.4.12)
livestreamer (1.12.2-cb)
pip (9.0.1)
psutil (5.0.0)
pytz (2017.2)
requests (2.4.3)
setuptools (20.10.1)
singledispatch (3.4.0.3)
six (1.10.0)
termcolor (1.1.0)
urllib3 (1.9.1)
websocket (0.2.1)
zope.interface (4.4.2)

no urllib installed....in the Requirements.txt file i have
urllib==1.21.1
DateTime==4.1.1
requests==2.18.1
Command==0.1.0
colorama==0.3.7
termcolor==1.1.0
configparser==3.5.0
websocket==0.2.1

can someone help me with this problem / how to make this work? many thx in advance for your help.

You have an old version of urllib3 (1.9.1) so you need to install a new one:

pip install urllib3==1.21.1

For urllib try:

https://www.versioneye.com/python/urllib/1.21.1

pip install https://pypi.python.org/packages/da/97/7ed06ae96106088e13e88fd6f91c17fb58786d705b851f82c9 91664b08db/urllib-1.21.1.tar.gz

Do not forget to install the websocket-client:

pip install websocket-client==0.37.0

Download link for new version 1.0.5 zip file is: https://github.com/horacio9a/myfreecams-anonymous/archive/master.zip

[john1291]

You have an old version of urllib3 (1.9.1) so you need to install a new one:

pip install urllib3==1.21.1

For urllib try:

https://www.versioneye.com/python/urllib/1.21.1

pip install https://pypi.python.org/packages/da/97/7ed06ae96106088e13e88fd6f91c17fb58786d705b851f82c9 91664b08db/urllib-1.21.1.tar.gz

Do not forget to install the websocket-client:

pip install websocket-client==0.37.0

Download link for new version 1.0.5 zip file is: https://github.com/horacio9a/myfreecams-anonymous/archive/master.zip

thank you so much for your help. i managed to install urllib and websocket-client...but now i have another problem.

when i run mfc.py i select 1 model and i choose REC....the problem is that it doesnt record anything it just opens a window with the model but no recording anywhere (i changed the path in config.cfg and i downloaded / extracted ffmpeg in the folder with the mfc.py)

do you know why?do i need to do something else in the script??

[horacio]

thank you so much for your help. i managed to install urllib and websocket-client...but now i have another problem.

when i run mfc.py i select 1 model and i choose REC....the problem is that it doesnt record anything it just opens a window with the model but no recording anywhere (i changed the path in config.cfg and i downloaded / extracted ffmpeg in the folder with the mfc.py)

do you know why?do i need to do something else in the script??

Check if there is a recording path you put in config.cfg. If it does not exist, create it. My recommendation is to have ffmpeg.exe and ffplay.exe in C:/Windows together with mfc.bat, which should be in the path by default ... if not check http://stream-recorder.com/forum/showpost.php?p=93758&postcount=509 again.

[john1291]

Check if there is a recording path you put in config.cfg. If it does not exist, create it. My recommendation is to have ffmpeg.exe and ffplay.exe in C:/Windows together with mfc.bat, which should be in the path by default ... if not check http://stream-recorder.com/forum/showpost.php?p=93758&postcount=509 again.

i tried putting the files in c:\windows but its the same....
i finally manage to make it work only when i put the path of the output folder to the file where the main.py file is....if i put another path it doesnt save the file ;))....atleast its working now...thx for all your help :D

(by the way how can i record more models at once, if its even possible)


ohh i figure it out how to record more models at once...i run the mfc.py file more times :) thx anyway :D

[Damianonymous]

...the problem is that it doesnt record anything it just opens a window with the model but no recording anywhere (i changed the path in config.cfg and i downloaded / extracted ffmpeg in the folder with the mfc.py)

do you know why?do i need to do something else in the script??

The output folder must be manually created, the script does not do it. The line should end with a slash, for example: D:\Videos\myfreecams-anonymous-master\captures\ or if in the same folder: .\captures\

[john1291]

The output folder must be manually created, the script does not do it. The line should end with a slash, for example: D:\Videos\myfreecams-anonymous-master\captures\ or if in the same folder: .\captures\

yes i know and i did that and yet it doesnt want to record in the specific folder....only in the D:\Videos\myfreecams-anonymous-master or another path as long as the path includes the folder where mfc.py is in....thx for your help

[Damianonymous]

Are you sure the path is terminated with a slash "\" ?

[mildronat]

HI dear forum users, help me please !!!! Can someone throw me a detailed manual how to record myfreecams.com??? The fact that I read 101 pages, and could not figure it out

[john1291]

Are you sure the path is terminated with a slash "\" ?

if i put the "\" at the end it doesnt record at all not even in the path where the mfc.py file is...when i tried other paths (where i created the folder myself) i tried with the backslash at the end and without it but stiill didnt work for either cases.

[Hermiod]

The output folder must be manually created, the script does not do it. The line should end with a slash, for example: D:\Videos\myfreecams-anonymous-master\captures\ or if in the same folder: .\captures\

In windows I had to use the other slash for it to work for me:
-C:\something\mfc-node <-- crashes
-C:/something/mfc-node <-- works

[Hermiod]

HI dear forum users, help me please !!!! Can someone throw me a detailed manual how to record myfreecams.com??? The fact that I read 101 pages, and could not figure it out

https://github.com/sstativa/mfc-node

Setup
1. Install Node.js (minimum node version requirement: v6).
2. Download and unpack the code.
3. Open Terminal (macOS) or Command Prompt (Windows) and go into the directory where you unpacked the files.
4. Install requirements by running npm install in the same directory as main.js is (Windows users may have to install Git).
5. Edit config.yml file and set desirable values for captureDirectory, completeDirectory, modelScanInterval.
6. Install ffmpeg. For Windows users, copy ffmpeg.exe into same directory as main.js is.

Hardest part for me was finding the ffmpeg for windows :D

After you get sstativa working, try horacio's version. Horacio also made a whole bunch of other versions (bat, exe,...). There is also a single file version somewhere in the thread (not sure how updated it is).

[supersonic80]

I think somewhere before step 4 should be something like “Install git for Windows” https://git-scm.com/download/win

https://github.com/sstativa/mfc-node

Setup
1. Install Node.js (minimum node version requirement: v6).
2. Download and unpack the code.
3. Open Terminal (macOS) or Command Prompt (Windows) and go into the directory where you unpacked the files.
4. Install requirements by running npm install in the same directory as main.js is (Windows users may have to install Git).
5. Edit config.yml file and set desirable values for captureDirectory, completeDirectory, modelScanInterval.
6. Install ffmpeg. For Windows users, copy ffmpeg.exe into same directory as main.js is.

Hardest part for me was finding the ffmpeg for windows :D

After you get sstativa working, try horacio's version. Horacio also made a whole bunch of other versions (bat, exe,...). There is also a single file version somewhere in the thread (not sure how updated it is).

[Gyttiie]

I'm curious of the same thing. It appears it is running correctly since I can access the web URL, but it does throw up a ffmpeg process for every model recording. Is there a way to only show the usual process? Using Windows.

Will anybody tell is it possible to fix? (Forever mfc-node)

[supersonic80]

I did not get it. What is the problem?
1 model = 1 ffmpeg process.

The script is only a "manager". It finds the model then starts ffmpeg process for her stream.

Will anybody tell is it possible to fix? (Forever mfc-node)

[Gyttiie]

I did not get it. What is the problem?
1 model = 1 ffmpeg process.

The script is only a "manager". It finds the model then starts ffmpeg process for her stream.

when the model come online ffmpeg windnow pop out and it's annoying

[Hermiod]

when the model come online ffmpeg windnow pop out and it's annoying

Using the standard mfc-node that does not happen.

[Gyttiie]

Using the standard mfc-node that does not happen.

With starndart i'll need always write "node main.js" when i loose internet for 1-2 mins

[infoberg]

Hi horacio,

do you think it would be possible to create a version which can automatically log into MFC as a user and joins group chat, if a model that is being recorded enters group?

infoberg

[horacio]

Hi horacio,

do you think it would be possible to create a version which can automatically log into MFC as a user and joins group chat, if a model that is being recorded enters group?

infoberg

I believe it is possible but I have not been doing this and I have no intention. Recording a group is similar to private recording and in that case it is better not to discuss it publicly in this forum;)

[Hermiod]

With starndart i'll need always write "node main.js" when i loose internet for 1-2 mins

Some pages ago we discussed how to fix that.

Simple version: Create a file in mfd-node directory named mfc-mode.bat
Inside the bat file paste:
:start
node main.js
goto :start

[Syl0pt]

Is there a way for the Forever program to work with Horacio's mfc.exe version?

[bilboe23]

Hallo zusammen,

habe mal ne kleine batch für windows geschrieben.
Also bei mir funktioniert es.

"mfc.exe" in "mfc.bac" umbenennen.
Neue Datei erstellen z.b. "mfc.bat".
Wichtig, die datei muß mit ".bat" enden.

Folgende Soße reinkopieren.
___________

@echo off
:Start
copy "mfc.bac" "mfc.exe"
mfc.exe
:Test
timeout 10
del "mfc.exe"
if %ERRORLEVEL%==0 goto Start
if NOT %ERRORLEVEL%==0 goto Test
_____________


"mfc.bat" starten, fertig

Zum testen den Taskmanager öffnen, und den Task "mfc.exe" beenden. Die Batchdatei startet dann alles neu.

Den timout habe ich auf 10 Sekunden gestellt damit die Batch nicht die ganze Zeit durchrennt, kostet performance. Könnt ihr ja ändern wenn ihr wollt.

[Nemesis]

MFC Recorder worked really fine for months, but since maybe two hours i have issues. I have a lot skips... does anyone have the same issues?:confused:

[Nemesis]

I just found out, that i have no access to almost all video chats, i can see the text messages, but not the video!
I tried different browsers, with different computers, i changed my IP! It's not the flash plugin, it works fine on all other sites, like cam4 and chaturbate and it's the newest version, only on mfc it doesn't work!
For example: i have acces to JULIANACANDY's and CocoMia's video chat, but not to SuperPanda_'s or Allesia_'s.
MFC worked fine till maybe 5 or 6 hours ago, since then it doesn't work well in the most chat rooms. The issue has to be on MFC's side?
It doesn't matter if i try it as a premium member or as a guest, with or without VPN, always the same result, i have no acces to 90% of the video chats!
... and the technical MFC support-link doesn't work, it loads and loads.....:mad:

[bilboe23]

Must be a technical issue, i have the same problem

[Nemesis]

Thanks for your answer, good to hear that i'm not the only one with that issue. I got finally an answer from the support, but i don't get it... they want a speed test screenshot and my IP to solve the issue???
I guess i'm not the only one who contacted them?
Howsoever, hopefully they fix it, i just purchased tokens there...:D

[TMK]

Just to add another data point - I've had the same issue a couple of times over the past week or so. I could view some models but not others in the browser and others would show blank instead of video and MFC Node would report "$modelname stopped recording" on the affected models over and over again.

It also affected desktop and mobile browsers for the same model. I don't know if it is a trial of some new DRM to prevent recording but if it is, it doesn't work very well as three other models I was recording at the same time were still recordable/viewable. Perhaps it is simply one of those random MFC bugs we have come to know and love(?)

[amatan12]

Chia sá?» kinh nghiệm cho m?¬nh vá»›i bá??n

[duck69]

Guys... i got mfc-node working, trying out nm-cb that i believe supersonic posted, it crashes the cmd after i start it, says something about rtmpdump....

Do i need to install rtmpdump for cb or is there some way around that to use ffmpeg?

How hard is it to install rtmpdump and get cb node to work? Is there a tutorial for rtmpdump for cb install or if anyone can help me...

[supersonic80]

I assume you use Windows because you've mentioned cmd. If you got the right scripts then you should already have rtmpdump.exe and librtmp.dll files.

If you have them in the folder with the script and it does not work then copy these two files somewhere like C:\Windows\system32.

If you don't have these files, then download this release (https://github.com/sstativa/capturebate-node/archive/master.zip), rtmpdump.exe and librtmp.dll should be there.

Guys... i got mfc-node working, trying out nm-cb that i believe supersonic posted, it crashes the cmd after i start it, says something about rtmpdump....

Do i need to install rtmpdump for cb or is there some way around that to use ffmpeg?

How hard is it to install rtmpdump and get cb node to work? Is there a tutorial for rtmpdump for cb install or if anyone can help me...

[duck69]

I assume you use Windows because you've mentioned cmd. If you got the right scripts then you should already have rtmpdump.exe and librtmp.dll files.

If you have them in the folder with the script and it does not work then copy these two files somewhere like C:\Windows\system32.

If you don't have these files, then download this release (https://github.com/sstativa/capturebate-node/archive/master.zip), rtmpdump.exe and librtmp.dll should be there.

unpacked that zip and dumped the nm-cb files into that and everything worked... I thought i had to go through a long process of setting up rtmpdump, thanks super.

[john1291]

Guys... i got mfc-node working, trying out nm-cb that i believe supersonic posted, it crashes the cmd after i start it, says something about rtmpdump....

Do i need to install rtmpdump for cb or is there some way around that to use ffmpeg?

How hard is it to install rtmpdump and get cb node to work? Is there a tutorial for rtmpdump for cb install or if anyone can help me...

hello. how did you got mfc-node wotking again if you dont mind me asking....for me it stopped working a few months ago and couldnt make it work again.

[duck69]

hello. how did you got mfc-node wotking again if you dont mind me asking....for me it stopped working a few months ago and couldnt make it work again.

try this john http://s000.tinyupload.com/index.php?file_id=45524128858815695189

[john1291]

try this john http://s000.tinyupload.com/index.php?file_id=45524128858815695189

hello. thx for the answer. but to be honest im not sure how to make it work. i opened the config.yml at models i put the name of the model inside the brackets [name] ...i saved the file and run the main file. It opend a cmd window it started to run the code and found 1 model in config.yml but its not recording. (i also put the ffmpeg in the folder) . do i need to install other programs or do other steps to make it work?

[duck69]

hello. thx for the answer. but to be honest im not sure how to make it work. i opened the config.yml at models i put the name of the model inside the brackets [name] ...i saved the file and run the main file. It opend a cmd window it started to run the code and found 1 model in config.yml but its not recording. (i also put the ffmpeg in the folder) . do i need to install other programs or do other steps to make it work?

restore the original config.yml, just put the directory location in the config.yml.

Start mfc.exe and wait 10 seconds then goto http://localhost:9080/ in chrome, from there click a models picture and click include, now go back to your config.yml and check the model format it added.

yml needs to have a compatible editor or it will read out wrong and crash the application, dont paste stuff from straight txt editor into it etc...

[supersonic80]

Usually you should not do any changes in config.yml, except checking destination directories.

As soon as you start the program you should open url in your browser http://localhost:9080 (make sure that port number matches the port number in config.yml, usually it is 9080).

I suppose when you open the page you will easily figure out what to do next.


hello. thx for the answer. but to be honest im not sure how to make it work. i opened the config.yml at models i put the name of the model inside the brackets [name] ...i saved the file and run the main file. It opend a cmd window it started to run the code and found 1 model in config.yml but its not recording. (i also put the ffmpeg in the folder) . do i need to install other programs or do other steps to make it work?

[john1291]

Usually you should not do any changes in config.yml, except checking destination directories.

As soon as you start the program you should open url in your browser http://localhost:9080 (make sure that port number matches the port number in config.yml, usually it is 9080).

I suppose when you open the page you will easily figure out what to do next.

ohhhh....i tried that now and its working. thank you so much for your help :D

[dahdiesel]

try this john http://s000.tinyupload.com/index.php?file_id=45524128858815695189
not there any more:confused:

[Syl0pt]

I'm having trouble installing Horacio's version of mfc-node found here. https://github.com/horacio9a/mfc-node

I've installed Node.js and ffmpeg. But in the setup section i'm having trouble with
#4 "Install requirements by running npm install in the same directory as mfc.js is."

Problem is i don't see an 'mfc.js', just 'main.js'

Where can I find 'mfc.js'?

I'm running Linux Mint 18 xfce if that helps any.

BTW i'm brand new to pretty much all of this. Node.js, mfc-node, mfc-auto, etc. Even if I do get it all installed and working I'm not even sure how to start up the program to record.

[supersonic80]

It’s the same file, different name. The correct instruction will be to run ‘npm install’ command in the same directory with package.json file.

I'm having trouble installing Horacio's version of mfc-node found here. https://github.com/horacio9a/mfc-node

I've installed Node.js and ffmpeg. But in the setup section i'm having trouble with
#4 "Install requirements by running npm install in the same directory as mfc.js is."

Problem is i don't see an 'mfc.js', just 'main.js'

Where can I find 'mfc.js'?

I'm running Linux Mint 18 xfce if that helps any.

BTW i'm brand new to pretty much all of this. Node.js, mfc-node, mfc-auto, etc. Even if I do get it all installed and working I'm not even sure how to start up the program to record.

[horacio]

I'm having trouble installing Horacio's version of mfc-node found here. https://github.com/horacio9a/mfc-node


My latest version that works is here:

https://github.com/horacio9a/mfc-node/tree/v2

[Syl0pt]

Thank you. I did that and it brought up this.

________________
npm notice created a lockfile as package-lock.json. You should commit this file.
added 36 packages in 7.893s
________________

Not sure if I did it wrong or not. I opened the terminal by right clicking inside the mfc-node-2 folder I unpacked and clicked "Open in terminal", then typed npm install and got that message.

[Syl0pt]

Thank you. I did that and it brought up this.

________________
npm notice created a lockfile as package-lock.json. You should commit this file.
added 36 packages in 7.893s
________________

Not sure if I did it wrong or not. I opened the terminal by right clicking inside the mfc-node-2 folder I unpacked and clicked "Open in terminal", then typed npm install and got that message.

NVM.. i got it working. Thank you guys.

[Syl0pt]

Having a bit of a problem with Horacio's mfc-node-2

I was reading a few pages back on this thread and saw the Forever app mentioned, so I installed it using:
Installation
$ [sudo] npm install forever -g

Usage
forever start app.js

I ran it in the right directory and it threw up warnings about minUptime not set, --spinTime not set, etc.
So i decided to figure out that stuff later and start back up mfc-node the usual way: node main.js.

But upon doing so I now get this message:

Error: listen EADDRINUSE :::9080
at Object._errnoException (util.js:1021:11)
at _exceptionWithHostPort (util.js:1043:20)
at Server.setupListenHandle [as _listen2] (net.js:1344:14)
at listenInCluster (net.js:1385:12)
at Server.listen (net.js:1469:7)
at Object.<anonymous> (/home/syl0pt/Videos/mfc-node-2/main.js:476:4)
at Module._compile (module.js:624:30)
at Object.Module._extensions..js (module.js:635:10)
at Module.load (module.js:545:32)
at tryModuleLoad (module.js:508:12)
at Function.Module._load (module.js:500:3)
at Function.Module.runMain (module.js:665:10)
at startup (bootstrap_node.js:187:16)
at bootstrap_node.js:608:3

Any idea what the problem could be?

EDIT TO ADD: Also sometimes I get this message:

module.js:529
throw err;
^

Error: Cannot find module 'bluebird'
at Function.Module._resolveFilename (module.js:527:15)
at Function.Module._load (module.js:476:23)
at Module.require (module.js:568:17)
at require (internal/module.js:11:18)
at Object.<anonymous> (/home/syl0pt/Videos/mfc-node-2/main.js:3:15)
at Module._compile (module.js:624:30)
at Object.Module._extensions..js (module.js:635:10)
at Module.load (module.js:545:32)
at tryModuleLoad (module.js:508:12)
at Function.Module._load (module.js:500:3)

[Hermiod]

Having a bit of a problem with Horacio's mfc-node-2

I was reading a few pages back on this thread and saw the Forever app mentioned, so I installed it using:
Installation
$ [sudo] npm install forever -g

Usage
forever start app.js

I ran it in the right directory and it threw up warnings about minUptime not set, --spinTime not set, etc.
So i decided to figure out that stuff later and start back up mfc-node the usual way: node main.js.

But upon doing so I now get this message:

Error: listen EADDRINUSE :::9080
at Object._errnoException (util.js:1021:11)
at _exceptionWithHostPort (util.js:1043:20)
at Server.setupListenHandle [as _listen2] (net.js:1344:14)
at listenInCluster (net.js:1385:12)
at Server.listen (net.js:1469:7)
at Object.<anonymous> (/home/syl0pt/Videos/mfc-node-2/main.js:476:4)
at Module._compile (module.js:624:30)
at Object.Module._extensions..js (module.js:635:10)
at Module.load (module.js:545:32)
at tryModuleLoad (module.js:508:12)
at Function.Module._load (module.js:500:3)
at Function.Module.runMain (module.js:665:10)
at startup (bootstrap_node.js:187:16)
at bootstrap_node.js:608:3

Any idea what the problem could be?

EDIT TO ADD: Also sometimes I get this message:

module.js:529
throw err;
^

Error: Cannot find module 'bluebird'
at Function.Module._resolveFilename (module.js:527:15)
at Function.Module._load (module.js:476:23)
at Module.require (module.js:568:17)
at require (internal/module.js:11:18)
at Object.<anonymous> (/home/syl0pt/Videos/mfc-node-2/main.js:3:15)
at Module._compile (module.js:624:30)
at Object.Module._extensions..js (module.js:635:10)
at Module.load (module.js:545:32)
at tryModuleLoad (module.js:508:12)
at Function.Module._load (module.js:500:3)

https://www.npmjs.com/package/forever

forever --help

[Syl0pt]

https://www.npmjs.com/package/forever

forever --help

thanks, but i uninstalled forever earlier to see if it would help me get mfc-node back up and running. It didn't. Still getting the error message.