Audio/video stream recording forums

Attention Visitor:
You may have to register or log in before you can post:
  • Click the register link to sign up.
  • Registered members please fill in the form below and click the "Log in" button.
To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Audio/video stream recording forums > Media file management > Storing audio/video files securely
Register FAQ Members List Calendar Mark Forums Read

Reply Post New Thread
 
Thread Tools Display Modes
  #1  
Old 08-07-2009, 03:43 AM
Stream Recorder
 
Posts: n/a
Default

How to create a hidden drive in Windows (free method)


How to create a hidden drive in Windows (free method)
The drive will not show up in My Computer, will not be accessible from the command prompt, and won’t even show up in Safe Mode!

Before applying the hack, please back up your registry. You can do it by exporting it with regedit:
  1. Click Start, and then click Run.
  2. In the Open box, type regedit, and then click OK.
  3. Navigate to the very top of the registry key branches until you reach Computer.
  4. Highlight Computer by clicking on it once.
  5. From the Registry Editor menu, choose File and then choose Export....
  6. In the Save in box, select a location where you want to save the Registration Entries (.reg)
  7. In the File name box, type a file name, and then click Save.
The exported registry file is about 10-100 MB in size on a typical Windows 2000/XP/Vista installation. Please note that instead of backing up the whole registry you can back up a particular value only.

You can also make the duplicate key and rename it way if you need to come back to the original setting, you have it there.

How to create a hidden drive in Windows with Registry Editor
  1. In the Registry Editor navigate to the following registry hive:
    Code:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  2. Right-click on Explorer and choose "New" and then "DWORD Value".
  3. Name the new value "NoDrives" and then double click on it to open the properties dialog box. Click on "Decimal" for the Base unit.
  4. Type in one of the following values depending on that drive letter you want to hide.
    • A: 1
    • B: 2
    • C: 4
    • D: 8
    • E: 16
    • F: 32
    • G: 64
    • H: 128
    • I: 256
    • J: 512
    • K: 1024
    • L: 2048
    • M: 4096
    • N: 8192
    • O: 16384
    • P: 32768
    • Q: 65536
    • R: 131072
    • S: 262144
    • T: 524288
    • U: 1048576
    • V: 2097152
    • W: 4194304
    • X: 8388608
    • Y: 16777216
    • Z: 33554432
    • All: 67108863

    If you want to hide drive F, enter 16. If you want to hide drive H, enter 128.

    You can also hide multiple drives. For example, if you want to hide both drive F and drive H, enter 144, which is 16+128.
  5. Restart your computer for changes to make effect.
Please note that you can't hide system drives this way, because Windows needs it to work.

How to unhide your drive
When you want to get your drives back, change the value of NoDrives to 0.
Code:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

To make it easier you can create a couple of .reg files by exporting NoDrives, one with 0 and another one with the value that you need. By double-clicking .reg files you will be able to hide and unhide your drive(s).
Reply With Quote
  #2  
Old 08-07-2009, 05:21 AM
Stream Recorder
 
Posts: n/a
Default

Re: How to create a hidden drive in Windows (free method)


How to hide a partition or hard drive:
  1. Right Click on My Computer and Select "Manage".
  2. Select "Disk management".
  3. Right Click on the drive you want to hide
  4. Select "Change drive letter and paths"
  5. Click the "Remove" button
  6. You should see the warning that "Some program will no longer run". Click the "Yes" button to remove the drive.

To return your drive (partition), just repeat the steps 1-4 mentioned above and then click the "Add" button.
Reply With Quote
  #3  
Old 08-07-2009, 05:32 AM
Stream Recorder
 
Posts: n/a
Default

Re: How to create a hidden drive in Windows (free method)


The following method only allows to hide drives A, B, C, D and some of their combinations.

How to limit access to drives A, B, C, D with gpedit.msc
  • Click "Start" -> "Run".
  • Type "gpedit.msc" and hit the "OK" button.
  • Expand "Administrative Templates" in "User configuration"
  • Expand "Windows Сomponents"
  • Select "Windows Explorer"
  • On the right side of the Windows find "Hide These Specified Drives In My Computer" and double-click it. Turn hiding on and select the drive letters that you want to hide
  • Hit the "Apply" button. Hit the "Ok" button.
Reply With Quote
  #4  
Old 07-08-2016, 08:20 AM
boduyday0812 boduyday0812 is offline
Junior Member
 
Join Date: Jun 2016
Posts: 4
boduyday0812 is on a distinguished road
Default

Re: How to create a hidden drive in Windows (free method)


dịch vá»? sá»*a nh?* tá??i Tp HCM
Hotline: 090.224.55.99 - (08) 667 555 29
sua nha
Reply With Quote
  #6  
Old 12-08-2017, 01:49 AM
AllenRuh AllenRuh is offline
Member
 
Join Date: May 2017
Location: Yugoslavia
Posts: 45
AllenRuh is on a distinguished road
Default

от хозяина 1 ко


Шикарные 1 комнатные квартиры из кирпича для небольшой семьи с свободной планировки можно купить от застройщика Forrest в г. Одесса Фонтанка. Центр продаж находится по адресу г. Одесса, Фонтанка, ул.Независимости, 4. Цена за квартиру от 370 тыс. грн или 11,2 тыс. грн. за кв. м. Звоните по телефонам +38-050-019-33-33, +38-098-500-33-55, +38-093-246-73-39. Подробную информацию о застройщике Форрест смотрите здесь

https://for-rest.est.ua/13748474/
Reply With Quote
Reply Post New Thread
Tags: , , , , , ,



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:23 AM.


Powered by All-streaming-media.com; 2006-2011
vB forum hacked with Zoints add-ons