Trouble with a file

[n.p.]

I am looking at the main video on this page:

http://eestilaul.err.ee/videod/245a451c-d909-4ff4-8257-eb204316ec51

It was difficult getting the URLs, because the server runs on port 80 (so I couldn't use rtmpsrv and rtmpsuck - I wish they had options to change ports), but I eventually came up with:

rtmpdump --flashVer 'LNX 11,1,102,55' --rtmp rtmp://media.err.ee:80/etvsaated/2012.02.18_-_21.35-22.45_-_Eesti_Laul_2012.mp4 --swfUrl http://eestilaul.err.ee/js/players/flowplayer/flowp.layer_bwcheck_final.swf --pageUrl http://eestilaul.err.ee/videod/245a451c-d909-4ff4-8257-eb204316ec51 --flv 2012.02.18_-_21.35-22.45_-_Eesti_Laul_2012.mp4

For some strange reason, the first time I try gives an "ERROR: RTMP_Connect1, handshake failed" error, but it works (sort of) the second time (any thoughts on that?).

The problem is, I can't get more than sixty seconds (and then it restarts without truncating the file) at a time without using the "-v" (live) option. The live option gets around that problem, but then the dump dies every time at around eleven minutes (90 MB downloaded). And (of course), resume won't work with a "live" stream (even though this one isn't really live). So is there any way I can save this stream (I am using Linux if that is not obvious)? Thank you for your help.

[chap]

rtmpdump --rtmp rtmp://media.err.ee:80/etvsaated/2012.02.18_-_21.35-22.45_-_Eesti_Laul_2012.mp4  --flv 2012.02.18_-_21.35-22.45_-_Eesti_Laul_2012.mp4 -v

use rtmpdump http://bit.ly/xJ3Zwl

--rtmp rtmp://media.err.ee:80/etvsaated/2012.02.18_-_21.35-22.45_-_Eesti_Laul_20
12.mp4  --flv 2012.02.18_-_21.35-22.45_-_Eesti_Laul_2012.mp4 -v
RTMPDump v2.4 GIT-2011-12-22 (Compiled by KSV)
(c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPL
Connecting ...
INFO: Connected...
Starting Live Stream
INFO: Metadata:
INFO: trackinfo:
INFO:   timescale             48000.00
INFO:   length                210378752.00
INFO:   language              eng
INFO: sampledescription:
INFO:   sampletype            mp4a
INFO:   timescale             25.00
INFO:   length                109571.00
INFO:   language              eng
INFO: sampledescription:
INFO:   sampletype            avc1
INFO:   audiochannels         2.00
INFO:   audiosamplerate       48000.00
INFO:   videoframerate        25.00
INFO:   aacaot                2.00
INFO:   avclevel              30.00
INFO:   avcprofile            77.00
INFO:   audiocodecid          mp4a
INFO:   videocodecid          avc1
INFO:   width                 704.00
INFO:   height                396.00
INFO:   frameWidth            704.00
INFO:   frameHeight           396.00
INFO:   displayWidth          704.00
INFO:   displayHeight         396.00
INFO:   moovposition          616923165.00
INFO:   duration              4382.89
174532.125 kB / 1259.58 sec (28.7%)

[n.p.]

Read the suggested thread and learn that there are patches to the source code.
Go to the github mirror thinking that it will be easier to find the source code there.
Download the newest file.
Go to a search engine to figure out how to unpack a .7z file.
Learn that the p7zip package for my system comes with a bloated gui.
Download the source for the p7zip program and compile it.
Unpack the .7z file.
Unpack the official rtmpdump source code.
Attempt to apply the patch.
Notice that 21 hunks fail (about half of them).
Try think of an alternative to going through all of those hunks by hand.
Finally see the "Download as tar.gz" button prominently displayed in the middle of the github page.
Download and unpack the already patched source code.
Attempt to compile (fails with undefined references to sqrt, atan, and exp).
Back to the search engines to try to figure out what is going on.
Learn that I need to have -lm in my linker flags.
Try adding "-lm" to the command line (in XLDFLAGS), but that didn't work.
Edit the Makefile and add "-lm" to the end of the "LDFLAGS=-Wall $(XLDFLAGS)" line.
Successfully compile the patched rtmpdump.
Attempt to run the modified program (it keeps crashing after one and a half seconds).
Remember to LD_PRELOAD the modified librtmp.so, so it gets used instead of the system one.
Run the modified program.
See the stream restart every few seconds.
Remember (again) to add the -v flag.
Run the modified program again.
Learn that it stops at the same place as the unmodified program.

Connecting ...
INFO: Connected...
Starting Live Stream
INFO: Metadata:
INFO: trackinfo:
INFO:   timescale             48000.00
INFO:   length                210378752.00
INFO:   language              eng
INFO: sampledescription:
INFO:   sampletype            mp4a
INFO:   timescale             25.00
INFO:   length                109571.00
INFO:   language              eng
INFO: sampledescription:
INFO:   sampletype            avc1
INFO:   audiochannels         2.00
INFO:   audiosamplerate       48000.00
INFO:   videoframerate        25.00
INFO:   aacaot                2.00
INFO:   avclevel              30.00
INFO:   avcprofile            77.00
INFO:   audiocodecid          mp4a
INFO:   videocodecid          avc1
INFO:   width                 704.00
INFO:   height                396.00
INFO:   frameWidth            704.00
INFO:   frameHeight           396.00
INFO:   displayWidth          704.00
INFO:   displayHeight         396.00
INFO:   moovposition          616923165.00
INFO:   duration              4382.89
91078.496 kB / 658.45 sec (15.0%)
Caught signal: 13, cleaning up, just a second...
ERROR: WriteN, RTMP send error 32 (42 bytes)
ERROR: RTMP_ReadPacket, failed to read RTMP packet body. len: 14672
91117.962 kB / 658.79 sec (15.0%)
Download may be incomplete (downloaded about 15.00%), try resuming

Basically it stops in the same place (plus or minus two seconds) every time.

[n.p.]

Can anyone help me with this?

I ran it again with the --debug parameter, and it dies like this (at the same place):

[...]

91066.163 kB / 658.36 sec (15.0%)
DEBUG2: RTMP_ReadPacket: fd=4
DEBUG2:   0000:  46 00 00 15 00 01 8d 08                            F.......          
DEBUG2:   0000:  af 01 21 0a 55 4c 22 47  07 41 c0 59 08 32 43 ce   ..!.UL"G.A.Y.2C.  

[...]

DEBUG2:   0180:  51 af 8a 7d c9 cc a6 3a  3c 57 4b 44 07            Q..}...:<WKD.     
DEBUG2: RTMP_ReadPacket: fd=4
DEBUG2:   0000:  46 00 00 15 00 01 81 08                            F.......          
DEBUG2:   0000:  af 01 21 0a 55 3d 3d 96  a5 40 91 10 22 47 5d 76   ..!.U==..@.."G]v  

[...]

DEBUG2:   0170:  3d 96 f2 1d fb f1 1f bf  d6 4c b9 49 d5 60 bd 03   =........L.I.`..  
DEBUG2:   0180:  80                                                 .                 
DEBUG2: RTMP_ReadPacket: fd=4
DEBUG2:   0000:  47 00 00 28 00 1d 29 09                            G..(..).          
DEBUG2:   0000:  27 01 00 00 50 00 00 00  15 06 05 11 03 87 f4 4e   '...P..........N  

[...]

DEBUG2:   0fe0:  dd 74 df 1d 8d 3f 6d 62  f3 01 34 bb 7f 20 30 db   .t...?mb..4.. 0.  
DEBUG2:   0ff0:  15 df 51 d8 ff bd f1 a9  82 5d 7c 4a a3 30 d9 81   ..Q......]|J.0..  
DEBUG2: RTMP_ReadPacket: fd=4
DEBUG2:   0000:  c7                                                 .                 
DEBUG: RTMPSockBuf_Fill, recv returned -1. GetSockError(): 104 (Connection reset by peer)
DEBUG2: RTMP_SendPacket: fd=4, size=34
DEBUG2:   0000:  43 00 00 00 00 00 22 14                            C.....".          
DEBUG2:   0000:  02 00 0c 64 65 6c 65 74  65 53 74 72 65 61 6d 00   ...deleteStream.  
DEBUG2:   0010:  40 14 00 00 00 00 00 00  05 00 3f f0 00 00 00 00   @.........?.....  
DEBUG2:   0020:  00 00                                              ..                
Caught signal: 13, cleaning up, just a second...
ERROR: WriteN, RTMP send error 32 (42 bytes)
ERROR: RTMP_ReadPacket, failed to read RTMP packet body. len: 7465
91066.956 kB / 658.39 sec (15.0%)
DEBUG: RTMP_Read returned: 0
Download may be incomplete (downloaded about 15.00%), try resuming
DEBUG: Closing connection.