Capture and convert Streams from Vlive.tv - Problem to decrypt

[sanduhrgucker]

Hi,
My Daughter bought a celeb-interview on Vlive.tv
After the payment she feld sad because she read the videos can only be shown at the mobile app.
So she asked me to fix that. I failed at the last step... please help!

here is what i did:
1.) i downloaded the film in the Vlive app
- to to this, i had to rename some supersu files because the app recognised corectly my mobile is rooted.
2.) i transfered the file (a zip-file) to my pc then i unpacked all the stuff
Inside are:
- a Key file
- a m3u8 file
- thousands of .ts files

The content inside the keyfile seems to be binary.
The m3u8-file begins with:

#EXTM3U
#EXT-X-VERSION:3
#EXT-X-MEDIA-SEQUENCE:0
#EXT-X-TARGETDURATION:7
#EXT-X-KEY:METHOD=AES-128,URI="a32c23U4Tlo5Utw5NUg_srUcSQ_rmcvideo_1080P_1920_5120_192.key"
#EXTINF:5.805811,
a32c23U4Tlo5Utw5NUg_srUcSQ_rmcvideo_1080P_1920_5120_192-000000.ts
#EXTINF:5.372033,
a32c23U4Tlo5Utw5NUg_srUcSQ_rmcvideo_1080P_1920_5120_192-000001.ts
#EXTINF:5.205200,
a32c23U4Tlo5Utw5NUg_srUcSQ_rmcvideo_1080P_1920_5120_192-000002.ts
...

I think it should be possible to decrypt because i have the right key. But how? ;-)

Any Hint is welcome!

Regards
Rene'

[KSV]

If you can provide the key file and few fragments I can give it a shot.

[WHOOKIDSON]

Upload the zipfile so we can check it out

[sanduhrgucker]

Here is a smaler zip-file containing keyfile, m3u8-file and some ts-files:

https://www.dropbox.com/s/jnzg3qr631...easer.zip?dl=0

[WHOOKIDSON]

This is what I got:

ffmpeg version N-80953-gd4c8e93 Copyright (c) 2000-2016 the FFmpeg developers
  built with gcc 5.4.0 (GCC)
  configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-decklink --enable-zlib
  libavutil      55. 28.100 / 55. 28.100
  libavcodec     57. 50.100 / 57. 50.100
  libavformat    57. 41.100 / 57. 41.100
  libavdevice    57.  0.102 / 57.  0.102
  libavfilter     6. 47.100 /  6. 47.100
  libswscale      4.  1.100 /  4.  1.100
  libswresample   2.  1.100 /  2.  1.100
  libpostproc    54.  0.100 / 54.  0.100
Format aac detected only with low score of 1, misdetection possible!
[aac @ 0440adc0] More than one AAC RDB per ADTS frame is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[aac @ 0440adc0] Reserved bit set.
[aac @ 0440adc0] Number of bands (45) exceeds limit (28).
[aac @ 0440adc0] channel element 3.13 is not allocated
[aac @ 0440adc0] TNS filter order 22 is greater than maximum 20.
[aac @ 0440adc0] Reserved bit set.
[aac @ 0440adc0] Number of scalefactor bands in group (15) exceeds limit (12).
[aac @ 0440adc0] Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0440adc0] Remapped id too large
[aac @ 0440adc0]  is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[aac @ 0440adc0] If you want to help, upload a sample of this file to ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel@ffmpeg.org)
[aac @ 0440adc0] channel element 2.14 is not allocated
[aac @ 0440adc0] channel element 1.4 is not allocated
[aac @ 0440adc0] Reserved bit set.
[aac @ 0440adc0] invalid band type
[aac @ 0440adc0] channel element 2.10 is not allocated
[aac @ 0440adc0] channel element 3.15 is not allocated
[aac @ 0440adc0] channel element 3.8 is not allocated
[aac @ 0440adc0] Number of bands (22) exceeds limit (17).
[aac @ 0440adc0] channel element 2.14 is not allocated
[aac @ 0440adc0] Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0440adc0] Inconsistent channel configuration.
[aac @ 0440adc0] get_buffer() failed
[aac @ 0440adc0] Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0440adc0] Remapped id too large
[aac @ 0440adc0]  is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.
[aac @ 0440adc0] If you want to help, upload a sample of this file to ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel@ffmpeg.org)
[aac @ 0440adc0] channel element 2.6 is not allocated
    Last message repeated 1 times

What program did you use to download the video?

[sanduhrgucker]

The Video was downloaded with the native Vlive-app on android (https://play.google.com/store/apps/d...com.naver.vapp)

Maybe i bigger sample is nessesary?
I bundled a few more files:
https://www.dropbox.com/s/shtnihdi2m...easer.zip?dl=0

could you please try again?

Regards
rene´

[WHOOKIDSON]

I get the exact same message as before. I will try to look more into it.

[kimuchan]

I have the same problem with vlive, I'm already trying to decrypt a few hours ... but I had no results