rtmpdump RTMP_ReadPacket, failed to read RTMP packet header

[jojesh]

I am trying to capture the stream from http://zonytvcom.info/saki2/embed.ph...asianet.stream

i used

rtmpdump -r rtmpe://94.242.228.40:1934/live2  -W http://zonytvcom.info/saki/player/src2.swf -p http://www.zonytvcom.info/saki2/watch.php?live=asianet.stream -y asianet.stream -V -o test.flv -z

but i got

DEBUG: Invoking deleteStream
ERROR: RTMP_ReadPacket, failed to read RTMP packet header
DEBUG: Closing connection.

can anybody please suggest the proper rtmpdump way to get the stream

[chap]

rtmpdump -r rtmpte://94.242.228.40:1934/live2 -a live2 -W http://zonytvcom.info
/saki/player/src2.swf -p "http://www.zonytvcom.info/saki2/watch.php?live=asianet
.stream" -y asianet.stream -v -o test.flv -T "9op0b5@7n1s5ip1"
RTMPDump v2.4 GIT-2012-12-30 (Compiled by KSV)
(c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPL
Connecting ...
WARNING: Trying different position for server digest!
INFO: Connected...
Starting Live Stream
INFO: Metadata:
INFO:   audiochannels           1.00
INFO:   audiosamplerate         12000.00
INFO:   audiocodecid            mp4a
INFO:   videocodecid            avc1
INFO:   width                   320.00
INFO:   height                  240.00
INFO:   frameWidth              320.00
INFO:   frameHeight             240.00
INFO:   displayWidth            320.00
INFO:   displayHeight           240.00
INFO:   framerate               15.00
INFO: trackinfo:
INFO:   timescale               12000.00
INFO:   language                eng
INFO: sampledescription:
INFO:   sampletype              MP4A-LATM
INFO:   type                    audio
INFO:   config                  1488
INFO:   description             {AACFrame: size: 0, rate: 12000, channels: 1, sa
mples: 1024, errorBitsAbsent: true, profileObjectType: "LC"}
INFO:   timescale               90000.00
INFO:   language                eng
INFO: sampledescription:
INFO:   sampletype              H264
INFO:   type                    video
INFO:   profile-level-id        42e00c
INFO:   sprop-parameter-sets    Z0LgDJZSAoP2ApwUFBUAAAu4AAFfkIQ=,aM44gA==
INFO:   description             {H264CodecConfigInfo: profile: "Baseline", level
: 1.2, frameSize: 320x240, displaySize: 320x240, PAR: 1:1, frameRate: 15.0}
INFO: rtpsessioninfo:
INFO:   connectiondata          IN IP4 115.112.238.28
INFO:   name                    H264_QVGA (1)
INFO:   origin                  - 950699342 4883819 IN IP4 192.168.99.116
INFO:   timing                  0 0
INFO:   protocolversion         0
INFO: attributes:
INFO:   range                   npt=now-
356.659 kB / 15.92 sec

[jojesh]

thanks for the reply. But it would be helpful if you can share how it is solved.

how the -T value is obtained for the swf. I tried to get it using some flash disassembler but failed also tried with http://www.showmycode.com/ but could not obtain it.

Also please let me know why the protocol is changed to rtmpte. with this protpcol i got some problem but when i specify it with rtmpe it worked.

I would like to know from where i can get the latest rtmpdump

[nullacht]

@jojesh

I deleted some of your posts. One thread should be enough!

[jojesh]

@nullacht

Thanks...Actually it was a mistake

[jojesh]

how the -T value is obtained for the swf. I tried to get it using some flash disassembler but failed also tried with http://www.showmycode.com/ but could not obtain it.

Also please let me know why the protocol is changed to rtmpte. with this protpcol i got some problem but when i specify it with rtmpe it worked.

can anybody give an answer to my above doubts..am I at wrong thread?