Well let us add another post about how this isn't working, lol
Have spent a total of about 20 hours in 2 days trying everything.
1st, the setup:
4 cam dvr (chinese junk, chinese rough translation pdf (impossible to make any sense of) here it is on site:
Code:
http://www.dynaspy.com/security-camera-systems-cctv/4-camera-systems/complete-4-channel-h-264-dvr-4-ir-outdoor-cameras-free-500gb-hdd
ISDN Modem: EQ-660R
Modem Info:
WAN Information
IP Address:184.6.X.XXX (X'd for obvious reasons)
IP Subnet Mask:255.255.248.0
Default Gateway:184.6.8.1
Active DNS:208.33.159.39
Primary DNS:208.33.159.39
Secondary DNS:71.2.28.14
VPI/VCI:8/ 35
LAN Information
MAC Address:00:02:cf:5d:07:1b
IP Address: 192.168.2.1
IP Subnet Mask: 255.255.255.0
DHCP: Server
DHCP Start IP: 192.168.2.2
DHCP Pool Size: 32
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
Router: Linksys WRT54G ver6
Router info:
Login Type: Automatic Configuration - DHCP
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DNS 1: 192.168.2.1
DNS 2:
DNS 3:
MTU: 1500
DVR INFO
IP: 192.168.3.3
web port: 33000
Media port:9000
OS: Winblows XP
Local Area Connection Status:
Address Type: Assigned by DHCP
IP Address: 192.168.3.2
Subnet Mask: 255.255.255.0
Default gateway: 192.168.3.1
Now assuming I have a static IP (IP addy hasn't changed in 4 years)
I try and enter 184.6.X.XXX:33000, I get nothing, (unable to connect) over the WAN (NOTE: HAVE TO USE IE6 or better, No FF)
I type in
http://192.168.3.3:33000/ within my network &
I get full interface and camera's working.
Now here are screens of the setup interface for aforementioned Chinese DVR camera rig:
Here is main screen:
Now here is the main setup for the network, here I got it setup for static, please note that the current addys you see in there are just one of many I have tried.
and here it is setup DHCP mode:
Now, considering I have 3 devices here (modem, router, & DVR) THAT ARE ALL running DHCP, should this be right???...I was under the impression that only one device (ISDN modem) should be running DHCP in the network chain, I could be wrong.
I have entered my IP address like this
http://184.6.xx.xxx:33000
get nothing, but all computers on internal here can see it if you put in
http://192.168.3.3:33000
Now there are the setup screens for this chinese nightmare, any brilliant minds here that can tell me what numbers to plug in where on this DVR Setup menu???
If more info needed, PM me please, thanks in advance to any help on this paltry dilemma
