Audio/video stream recording forums (http://stream-recorder.com/forum/index.php)
-   rtmpdump (http://stream-recorder.com/forum/forumdisplay.php?f=54)
-   -  

How to use rtmpsuck in Ubuntu 10.04 Lucid Lynx

 (http://stream-recorder.com/forum/showthread.php?t=7070)

Stream Recorder 07-21-2010 02:46 AM

How to use rtmpsuck in Ubuntu 10.04 Lucid Lynx


 
  1. Go to System -> Administration -> User ang Groups and create a new user. I have used the "rtmp" username for the new user, and didn't let the user to have any additional user privileges. The user will be used to monitor RTMP/RTMPE streams.
  2. Download the latest version of rtmpdump.
  3. Extract its content.
    I will use the following folder
    Code:
    /home/USER/Downloads/rtmpdump-2.3
  4. Open "/home/USER/Downloads/" with Nautilus. And right-click on the "rtmpdump-2.3" folder. Select the Share tab.
    Check "Share this folder", "Allow others to create and delete files in this folder", "Guest access (for people without a user account)".
    Hit the "Close" button.
    Note that sharing this folder is needed if you want to save videos with rtmpsuck. If you only need to get parameters, you can skip this step.
  5. Compile rtmpdump, rtmpsuck, rtmpsrv:
    In the Terminal
    Code:
    cd /home/USER/Downloads/rtmpdump-2.3
    make SYS=posix
  6. Redirect traffic from TCP port 1935 to the user created in Step 1. In the terminal:
    Code:
    sudo iptables -t nat -A OUTPUT -p tcp --dport 1935 -m owner  \! --uid-owner rtmp  -j REDIRECT
    where rtmp is the user created in Step 1.
  7. Then the account created in Step 1 within the terminal
    Code:
    sudo su rtmp
  8. And finally launch rtmpsuck
    Code:
    ./rtmpsuck
  9. Now visit the site that has the stream or start playing the stream, rtmpsuck will begin saving (ONLY if the folder you are currently in is shared)

franck59 09-05-2010 04:33 AM

Re: How to use rtmpsuck in Ubuntu 10.04 Lucid Lynx


 
Thank you for that excellent tutorial.

However, that is working only to record ONE stream at a time. Rtmpsuck only sees the first stream. How to do it if you want to record 2 or more streams with rtmpsuck at the same time?

Stream Recorder 04-12-2011 09:23 PM

Re: How to use rtmpsuck in Ubuntu 10.10 Maverick Meerkat


 
  1. Go to System -> Administration -> User ang Groups and create a new user. I have used the "rtmp" username for the new user, and didn't let the user to have any additional user privileges. The user will be used to monitor RTMP/RTMPE streams.
  2. Download and compile the latest version of rtmpsuck/rtmpdump/rtmpsrv from SVN
    1. Install the tools needed for accessing the code and compilation:
      Code:
      sudo apt-get install build-essential gcc make subversion libssl0.9.8 libssl-dev libssl0.9.8
    2. Check out the latest code from the Subversion repository:
      Code:
      svn co svn://svn.mplayerhq.hu/rtmpdump rtmpdump
    3. Code:
      cd rtmpdump
      cd trunk
    4. Code:
      make
    5. And use the following to install:
      Code:
      sudo make install
  3. Create the following folder
    Code:
    /home/USER/Downloads/dumps
  4. Make the folder the folder created in Step 4 shared:
    1. Open "/home/USER/Downloads/" with Nautilus. And right-click on the "dumps" folder.
    2. Select the Share tab.
    3. Check "Share this folder", "Allow others to create and delete files in this folder", "Guest access (for people without a user account)".
    4. Hit the "Close" button.
    Note that sharing this folder is needed if you want to save videos with rtmpsuck. If you only need to get parameters, you can skip this step.
  5. Redirect traffic from TCP port 1935 to the user created in Step 1. In the terminal:
    Code:
    sudo iptables -t nat -A OUTPUT -p tcp --dport 1935 -m owner  \! --uid-owner rtmp  -j REDIRECT
    where rtmp is the user created in Step 1.
  6. Then the account created in Step 1 within the terminal
    Code:
    sudo su rtmp
  7. Then go to the folder created in Step 4
    Code:
    cd /home/USER/Downloads/dumps
  8. And finally launch rtmpsuck
    Code:
    ./rtmpsuck
  9. Now visit the site that has the stream or start playing the stream, rtmpsuck will begin saving (ONLY if the folder you are currently in is shared)

ampakine 05-23-2011 08:22 AM

Re: How to use rtmpsuck in Ubuntu 10.04 Lucid Lynx


 
I got up to step 5 and heres the error I got:
Code:
horse@horse:~/Downloads/rtmpdump-2.3$ make SYS=posixmake[1]: Entering directory `/home/horse/Downloads/rtmpdump-2.3/librtmp'
gcc -Wall  -DRTMPDUMP_VERSION=\"v2.3\" -DUSE_OPENSSL  -O2 -fPIC  -c -o rtmp.o rtmp.c
rtmp.c:40: fatal error: openssl/ssl.h: No such file or directory
compilation terminated.
make[1]: *** [rtmp.o] Error 1
make[1]: Leaving directory `/home/horse/Downloads/rtmpdump-2.3/librtmp'
make: *** [librtmp/librtmp.a] Error 2
I'm not that knowledgeable when it comes to installing programs on linux so I don't really know what the problem is here. I can see there is no openssl folder in the librtmp folder. Any idea what I've done wrong?

Stream Recorder 05-23-2011 08:30 AM

Re: How to use rtmpsuck in Ubuntu 10.04 Lucid Lynx


 
Quote:
Originally Posted by ampakine (Post 29311)
rtmp.c:40: fatal error: openssl/ssl.h: No such file or directory
http://stream-recorder.com/forum/sho...87&postcount=3

Bman 06-16-2012 10:02 PM

Re: How to use rtmpsuck in Ubuntu 10.04 Lucid Lynx


 
Any ways to do this with Windows??

oldtimer 10-17-2012 11:55 AM

Re: How to use rtmpsuck in Ubuntu 10.04 Lucid Lynx


 
This works great, no complaints.
Would you dummy this down
"iptables -t nat -A OUTPUT -p tcp --dport 1935 -m owner \! --uid-owner rtmp -j REDIRECT"


All times are GMT -6. The time now is 01:08 AM.