Audio/video stream recording forums (http://stream-recorder.com/forum/index.php)

- Video stream recording (http://stream-recorder.com/forum/forumdisplay.php?f=4)

- -

Jaksta - conversion settings

(http://stream-recorder.com/forum/showthread.php?t=4588)

Jaksta - conversion settings

Hi,

as you all know Jaksta and Replay Media Catcher (RMC) both come with the option to convert your files after you finished recording. I want Jaksta to convert my recordings into Xvid but I fail at the ffmpeg command line.

The default command line for let's say "IPod Optimum Quality (MPEG 4)" looks like this:
<CommandLine>-y -i "{0}" -ss 0.00 -vcodec mpeg4 -r 24.00 -s 320x240 -b 1200000 -acodec libfaac -ab 131072 -ar 48000 -ac 2 -f mp4 "{1}"</CommandLine>

I want basically the same thing but for Xvid (1.22) resulting in a .avi container. Also the sound settings are too high for me. I'd prefer AC-3 with 32kbit/11025Hz/Mono (since most streams come in this low quality anyway).

So, how does the command line I need have to look like? Thanks in advance.

Re: Jaksta - conversion settings

Jaksta's conversion settings can be changed using Tools > Conversion Settings:

Jaksta uses the excellent open source product FFMPEG for conversions and the Conversion Settings dialog provides a way to set the command line parameters. More information on these parameters can be found in the FFMPEG documentation.

Code:

Output format corresponds to -f 

Start Time Offset corresponds to -ss 

Disable Video corresponds to -vn 

Video codec corresponds to -vcodec 

video or ame Rate corresponds to -r 

Video Bit Rate corresponds to -b 

video or ame Size corresponds to -s 

Audio Codec correponds to -acodec 

Audio Bit Rate correpsonds to -ar 

Audio Channels correpsonds to -ac 

Audio Sample rate correpsonds to -ar 

Audio Volume corresponds to -vol (256 is normal)

To adjust or create new conversion setting presets please open the Conversion Settings dialog from the Tools > Conversion Settings menu item.

To adjust an existing preset select it from the drop down list, adjust the value and click the Save button.

To create a new preset, select a preset that is similar to the one you want to create from the drop-down list and click the Clone button. Enter a new name for the preset in the New Preset dialog and click OK. Adjust the settings as required and click the Save button.

To reset all presets back to the system defaults click the System Defaults button.

Audio levels can be changed by adjusting the Audio Volume setting up or down.

Please contact support At jaksta.com for more specific and personal support.