Lurk4

Lurk4

 

Hay guise, I'm new to this forum and to capturing so please be gentle. Haven't seen a thread about this, sorry if it's a double post or in the wrong section.

Can somebody tell me where I can get the Lurk4 software or how I can contact the guy that can hook me up?
What other recommendable software for automatic capturing is out there (for cam4, camfuze, chaturbate, stickam, etc.)?

Thanks in advance.

Re: Lurk4

 

I'm a huge fan of Replay Media Catcher

Re: Lurk4

 

yea, I really stopped bothering about checking PMs. I don't have time to work on l4 any longer, I keep it alive but I can't be arsed selling it online, I make more money working my regular job.

I'm still waiting for someone else to pick up the idea, I would help to implement the MFC "protocol"..

Re: Lurk4

 

It still works as is for Cam4 though? There are a few cams I miss all the time because I'm at work when they run and have been searching high and low for a way to capture them. Would love to get my hands on this if you don't mind, would even be willing to pay a reasonable fee as well.

Re: Lurk4

 

Don't know if something went wrong on my end, but it's not working at all now.

Re: Lurk4

 

itsme, if you're not selling l4 anymore or spreading it around, can you maybe explain to me how you get the rtmp urls of Cam4 streams? Currently I'm using WinPcap, but that requires the webcam to be started in the browser and makes it difficult to do the downloading automatically. I'm looking for a more direct way of getting the rtmp urls without using a browser.

I tried to decompile the swf of Cam4 with several tools, but they only show a few lines of code that have nothing to do with the 'connection' part..

When using Wireshark I can see that there's a "initializeReady" and "requestVideoStream" command that will send back "_result", which is the rtmp url, but I don't know how to send those commands in order to get the rtmp url.

Re: Lurk4

 

I can take over for you. PM me, and we can work it out.

Re: Lurk4

 

I've made some progress.

1) First I get the server IP and 'app' from the "../direct?username...." url.

2) I connect to the server and make the C0+C1 handshake.

3) The server sends me S0+S1+S2 handshake.

4) I make the C2 handshake and send 'connect' command with 'app', 'flashVer', 'swfUrl', etc to the server.

5) The server replies with "Connection succeeded" message with 'connectionId'.


Here is the part I don't get. I need to send "sessions/<connectionId>" + "<broadcaster>/chat" + "users/0". They are three amf0 messages, but there is 16 bytes of data at the beginning I need to send that Wireshark sees as part of the Transmission Control Protocol and this data changes every time. If that data is not correct, then the server won't send the expected reply. I have no idea what to do here.

Re: Lurk4

 

Never mind my previous reply. It was a small stupid mistake. I wrote the first letter of the broadcaster's name with a capital when sending "<broadcaster>/chat" and it should be all lowercase.

Re: Lurk4

 

how can I get lurk4?

Re: Lurk4

 

Sent a pm to itsme

Re: Lurk4

 

Elegro, I saw that you offered to take over on the Lurk4 project. If you (or anyone else) would like to collaborate on this, or any other related project please let me know.

I have extensive knowledge in the field of encoding/streaming.

Just PM me your email address.

Thanks.

Re: Lurk4

 

I have never offered to take over the Lurk4 project. I simply wanted to make my own automatic Cam4 downloader and asked Itsme if he could help me with something I didn't understand. Eventually it was just a small mistake that I fixed myself.

Btw, Itsme is now updating Lurk4 again.

Re: Lurk4

 

But he's not answering pms :<

Re: Lurk4

 

Lurk4 can continue record the private shows feed without necessarily be there ?

Re: Lurk4

 

i don't think so

Re: Lurk4

 

hi there, could you point me to lurk4 to purchase? thank you..

Re: Lurk4

 

were you able to locate lurk4? very interested. thanks!

Re: Lurk4

 

is this tool still developed ?

Re: Lurk4

 

I think Lurk is still developed as a friend gave me a new copy from 6/8/2013 but unfortunately lately its stopped working.

It seems to get hung up on model 101/1096 when it starts up:

I'd be curious if anyone knows if there is a way to fix this and/or how I can go about getting a copy of Lurk myself rather than nag my friend to check for an update. I've tried sending itsme a private message numerous times on here but his mailbox is always full when I try :(

Re: Lurk4

 

I have been trying to do that for months but....

itsme has exceeded their stored private messages quota and can not accept further messages until they clear some space.

Re: Lurk4

 

So I heard that Dwight_K_Schrute from Kitty-Kats and FileGuide was selling it. I sent him a message and he said he'd sell it to me for $200. Is this the only source there is for it?

Re: Lurk4

 

200$ lol normal price 30 euros

Re: Lurk4

 

I'd love to but I can't find any way to get my hands on it since I guess Dwight got banned from their site for being an asshat (because thats what he is) and he no longer has the latest build:(