Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Audio/video stream recording forums (http://stream-recorder.com/forum/index.php)
-   WM Recorder - stream capture software (http://stream-recorder.com/forum/forumdisplay.php?f=44)
-   -  

Problem with WM Recorder 14 in Vista x64: Repeated registration message at startup

 (http://stream-recorder.com/forum/showthread.php?t=5353)

Stream Ripper 02-04-2010 07:49 PM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
Quote:
Originally Posted by rswatts (Post 16227)
Every single time I open WM Recorder 14, I get a dialog box that pops up that says, "WM Recorder 14 has a lot of exciting benefits. Would you like to learn about upgrading to WM Recorder 14 now?". Regardless of whether I choose yes or no, I am taken to the screen to enter my registration code.

I enter my key and all is good. But what a pain it is becomming to have to do this every single time.:mad:

I am now running WM recorder version 14.1 - 01/24/10., on a Windows 7 PC.

I have done the uninstall/reinstll, and run as administrator numerous times.

Any suggestions on how to make this issue go away?
Did you purchase the upgrade for wmr 14 for $9.99?

It sounds like you're trying to use an old code with the new version...

PChuck 02-08-2010 06:50 PM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
Quote:
Originally Posted by Stream Ripper (Post 16314)
Did you purchase the upgrade for wmr 14 for $9.99?

It sounds like you're trying to use an old code with the new version...
This wasn't directed at me specifically but I'll answer because I also reported the problem.

I purchased the $9.99 upgrade and have tried to installed the "code" that was installed with the installer. I installed it on a computer that had a previous version. I've tried to install it on a clean computer, with no previous version installed. I've tried Windows Vista both x86 and x64 as well as Windows 7. The same thing happens all the time. The problem with this version persists.

It still hasn't been fixed. :mad:

Stream Ripper 02-09-2010 07:17 PM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
Quote:
Originally Posted by PChuck (Post 16475)
This wasn't directed at me specifically but I'll answer because I also reported the problem.

I purchased the $9.99 upgrade and have tried to installed the "code" that was installed with the installer. I installed it on a computer that had a previous version. I've tried to install it on a clean computer, with no previous version installed. I've tried Windows Vista both x86 and x64 as well as Windows 7. The same thing happens all the time. The problem with this version persists.

It still hasn't been fixed. :mad:
Did you use the new code they gave you? It's not an auto upgrade, you do need to use the new code. PM me your code, i'll test it and let you know what I get.

PChuck 02-13-2010 03:12 AM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
Quote:
Originally Posted by Stream Ripper (Post 16505)
Did you use the new code they gave you? It's not an auto upgrade, you do need to use the new code. PM me your code, i'll test it and let you know what I get.
Perhaps I'm misunderstanding what you mean by "code". To install the program, I run the install program I downloaded from wmrecorder.com and follow the instructions. After the installation, I run the program.

Is there something else I'm supposed to do? Are you referring to the installation program when you refer to "code"?

Stream Recorder 02-13-2010 03:24 AM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
I suppose by the code Stream Ripper meant a serial number

Stream Ripper 02-15-2010 08:05 PM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
Quote:
Originally Posted by Stream Recorder (Post 16587)
I suppose by the code Stream Ripper meant a serial number
This is correct. :-) You need to pay to play, after all. :D

PChuck 02-17-2010 02:21 PM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
Quote:
Originally Posted by Stream Ripper (Post 16638)
This is correct. :-) You need to pay to play, after all. :D
If you look at my original post in this thread, I posted that I'd just bought the 14 upgrade (on January 3) and asked if I should have gotten a new registration code, which I didn't. As a matter of fact, I didn't get any kind of confirmation email at all but I was charged.

FTR, I've purchased all of the Applian's WM products as well as the Replay Suite.

Stream Ripper 02-17-2010 10:42 PM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
Quote:
Originally Posted by PChuck (Post 16678)
If you look at my original post in this thread, I posted that I'd just bought the 14 upgrade (on January 3) and asked if I should have gotten a new registration code, which I didn't. As a matter of fact, I didn't get any kind of confirmation email at all but I was charged.

FTR, I've purchased all of the Applian's WM products as well as the Replay Suite.
Can you please PM me your email address? I'll look up your reg code for WMR 14 and PM it back. Alternatively, you can also submit a ticket at wmrecorder.com and get the code from them.

Thanks :D

PChuck 03-03-2010 02:19 PM

Re: Problem with WM Recorder 14 in Vista x64: Repeated registration message at startu


 
FYI, for anyone following this thread, the problem was resolved with an new registration code so the reg code for earlier version don't work for the version 14 update. :)


All times are GMT -6. The time now is 12:26 AM.
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page