Building rtmpdump 2.4 for Windows

[blackfirex99]

Hey everyone,

I have been desperately trying to build the executable for rtmpdump for Windows, but I really don't know what I'm doing, to be honest. I have made a small modification to the code and now I just need the exe file. I have installed MinGW and installed a bunch of stuff the internet told me to, but I really don't know what to do.

If someone could please walk me through the process of building rtmpdump.exe, I would be eternally grateful and I'll even pay you. Anyone who gives me the help I need to do this can get $20 in Bitcoin! And I'm sorry if this is against the forum rules; I'm new here.

Thank you all so much!

[blackfirex99]

Finally figured it out! Many thanks to the people who wrote the posts over at http://stream-recorder.com/forum/rtm...s-t8123p2.html for helping me figure this out. Here's what all I did for anyone who wants to know in the future:

1) Download and install MinGW
2) Add C:\MinGW\bin and C:\MinGW\local\bin to your Path environment variable (then close and re-open cmd if you have it open)
3) Open up the MinGW Installation Manager
4) Install all of the packages labeled mingw32-libz
5) Install all of the packages labeled msys-wget
6) Install all of the packages labeled msys-libintl
7) Install all of the packages labeled msys-libiconv
8) Install all of the packages labeled mingw32-gcc
9) Install all of the packages labeled msys-make
10) Install all of the packages labeled mingw32-libgcc
11) Open up cmd and run the following commands:
- wget https://tls.mbed.org/code/releases/p...-1.0.0-gpl.tgz
- tar fx polarssl-1.0.0-gpl.tgz
- cd polarssl-1.0.0
- make CC=gcc LDFLAGS="-L../library -lpolarssl -lws2_32"
- make DESTDIR=MinGW install
12) Copy everything in the newly created MinGW folder (it's in the folder polarssl-1.0.0) to C:\MinGW
13) Go to http://gnuwin32.sourceforge.net/packages/libintl.htm and download/extract the binaries, then copy libintl3.dll to C:\MinGW\bin
14) Go to http://gnuwin32.sourceforge.net/packages/libiconv.htm and download/extract the binaries, then copy libiconv2.dll to C:\MinGW\bin
15) Go back to cmd and run the following commands:
- git clone git://git.ffmpeg.org/rtmpdump
- cd rtmpdump
- make SHARED= SYS=mingw CRYPTO=POLARSSL LIBZ="-lz -static"
16) You can also optionally make librtmp.dll by running this command:
- make SYS=mingw CRYPTO=POLARSSL LIBZ="-lz -static"

That's the guide I wish I had when I was doing all this! Hope this helps somebody!